On Sat, Dec 8, 2018 at 1:55 AM Rod G8DGR <rodsmallwoo...@btinternet.com> wrote:
> Nice try Josh - close – you have to change the crystal first and you > can’t get them. > https://www.mouser.com/ProductDetail/ABRACON/AB-196608MHZ-B2?qs=sGAEpiMZZMukHu%252bjC5l7YUoOOqNWuembrOT4XjNGTzc%3d > > > Rod Smallwood - Digital Equipment Corporation 1975 – 1985 > > > > > > Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for > Windows 10 > > > > *From: *Josh Dersch via cctalk <cctalk@classiccmp.org> > *Sent: *08 December 2018 06:36 > *To: *General Discussion: On-Topic and Off-Topic Posts > <cctalk@classiccmp.org> > *Subject: *Re: PDP-8/e > > > > On Fri, Dec 7, 2018 at 10:29 PM Rod G8DGR via cctalk < > cctalk@classiccmp.org> > > wrote: > > > > > It can only do 110 baud !! > > > > > > > Unless you have an oddball SLU, this is not true -- what do you have > > installed? The earlier M8650 and the later M8655 can both be jumpered for > > higher baud rates. > > > > - Josh > > > > > > > > > > > > Sent from Mail for Windows 10 > > > > > > From: Pete Turnbull via cctalk > > > Sent: 08 December 2018 03:15 > > > To: cctalk@classiccmp.org > > > Subject: Re: PDP-8/e > > > > > > On 07/12/2018 17:46, Jon Elson via cctalk wrote: > > > > On 12/07/2018 11:38 AM, Rod G8DGR via cctalk wrote: > > > >> Oh good how do you set them to 110 baud? > > > >> > > > > Oh, WOW! Good catch, it only goes down to 300 baud! major screwup, > > > > ought to be reported to the developers. > > > > > > But wouldn't it be better to set the serial card in the PDP-8/E to > > > something faster anyway? Although on one of the serial cards, that > > > requires a crystal change, so though commonly done, may not be practical > > > for Rod. > > > > > > -- > > > Pete > > > Pete Turnbull > > > > > > > > >