Hi all, I've got an Advantech Labtool48 parallel Port Programmer lately for fifty bucks. I've got it w/o any Software, cable or documentation and now I have a few questions.
1. Is the parallel Cable a straight one to one Cable? The Labtool48 has an male connector on the back so a standard cable wouldn't fit.. (ok, think I can reverse engeneer or at least try that if needed..) 2. This isn't a Labtool48UXP, the UXP Version seems to have an USB connector additionally, doesn anyone know if the Software that Advantech provides (http://www.aec.com.tw/software_files/LT48UXP_83203.exe) will work with the Labrtool48? 3. I want to programm Altera PLD's EPM7160LC84. On many sites on the web can be read that Advantech is providing an PDF with the required "pin swapping Table" so the user can build adapters himselves..this seems to be history, the link http://www.aec.com.tw/products/adapters.pdf is dead and the wayback machine shows that it is dead for many years. Doens someone has possibly a copy of this pdf? TIA, Holm -- Technik Service u. Handel Tiffe, www.tsht.de, Holm Tiffe, Freiberger Straße 42, 09600 Oberschöna, USt-Id: DE253710583 i...@tsht.de Fax +49 3731 74200 Tel +49 3731 74222 Mobil: 0172 8790 741