Hi AJ, I also have some TSC documentation here that you might find useful including the TSC Assembler System 1.4 source code and the TSC Disassembler too.
http://vintagecomputer.ca/files/SWTPC/ Hope this helps. Santo On Thu, Dec 20, 2018 at 3:21 AM AJ Palmgren via cctalk < cctalk@classiccmp.org> wrote: > Bill, thank you for this thoughtful response. hand-punching is no small > thing. That is amazing dedication, and from what I know of you, I am not > at all surprised... > > Yes, it was absolutely an assembler for the 6800 processor. > > Thanks for mentioning the cassette for the Altair, that would be super > retro-geeky cool to play with...but yes, this is an extremely busy season > for most, if not all of us. > > It looks like Monty McGraw might have come through with something, so let's > check out his page suggestion. > > Thank you! > > > On Wed, Dec 19, 2018 at 3:44 AM Bill Degnan <billdeg...@gmail.com> wrote: > > > > > > > On Wed, Dec 19, 2018, 4:46 AM AJ Palmgren via cctalk < > > cctalk@classiccmp.org wrote: > > > >> Hi, all. > >> > >> Would anyone here happen to have access to the original early 80s binary > >> files to to run TSC Assembler? > >> > >> http://bit.ly/2rLsORe > >> > >> I'm looking for the vintage software that this document refers to: TSC > >> Floating Point Package by Technical Systems Consultants. > >> > >> I know there's a fair number of more modern assemblers that will > >> accomplish > >> essentially the same thing (LWASM, A09, etc), but I was curious to see, > >> and > >> play with, the old-school version of this on one of my vintage > machines... > >> > >> Thanks, everyone! > >> AJ > >> > >> -- > >> > >> Thanks, > >> AJ Palmgren > >> > > > > AJ .. I did not read the code to determine for myself but what is the > > processor / instruction set that goes with the TSC assembler, 6800? I > once > > hand punched the entire TSC BASIC to a papertape so it could be read into > > an Altair 680 via Teletype. Given the date on the assembler, and their > > BASIC, it is very possible that at that time TSC sold an assembler for > the > > 6800 then. It should not take long to determine what instruction set > your > > TSC doc pertains to. I might have it in cassette for the Altair but I am > > kind of busy to archive it unless no one has it otherwise. Busy time of > > the year. > > > > Bill > > > >> > > -- > > Thanks, > AJ Palmgren > http://fb.me/SelmaTrainWreck > http://SelmaTrainWreck.blogspot.com > https://www.facebook.com/profile.php?id=100010931314283 > https://www.linkedin.com/in/aj-palmgren-4a085516/ >