FYI on the HP 3000 and 9000 systems make sure you get one that has a field replaceable clock battery. Some early models did not (e.g. 917) and after a few years the system becomes a brick. :-(
Lee C. On Thu, Jan 24, 2019 at 9:37 PM Jesse Dougherty via cctalk < cctalk@classiccmp.org> wrote: > The cheapest I have is a 947RX, its $725.00 for that. I have a > Single-ended 4GB boot and 128MB in the configuration. If you want I can > install a storage drive, more memory, tape drive, or what ever you need. > If you want something newer than the 9x7 line, I have a few 918 boxes, I > quoted one below. I can load 6.5 or 7.5. It comes with a 30-day warranty > and limited set-up support. > > HP 3000 947RX Server > 128MB Memory > 4GB SCSI-2 Internal Boot Disk Drive > MPE/iX Pre-loaded > $725.00 > > HP 3000 918LX Server > 128MB ECC Memory > 4GB SCSI-2 Internal Boot Disk Drive > MPE/iX Pre-loaded > $800.00 > > On 1/24/19 12:58 PM, Kevin Bowling wrote: > > Do you have any MPE systems that would be interesting for a hobbiest > > but not too expensive? > > > > On Thu, Jan 24, 2019 at 10:13 AM Jesse Dougherty via cctalk > > <cctalk@classiccmp.org <mailto:cctalk@classiccmp.org>> wrote: > > > > how about 50 bucks? > > > > Jesse > > > > Cypress Tech > > > > > > On 1/23/19 6:37 PM, Fred Cisin wrote: > > > How much would you charge for the following? > > > > > > a 12922, (part of a 3 board mux set for TSB) > > > -- Lee Courtney +1-650-704-3934 cell
