Do you have a schematic that shows what it does. You could write your own file is not really complicated for a 16L8. I wrote my own for my 6532to6530 adapter for the KIM-1. I'll admit I did a logic mistake the first time but I'd have done the same with palasm. Dwight ________________________________ From: cctech <cctech-boun...@classiccmp.org> on behalf of Alan Hightower via cctech <cct...@classiccmp.org> Sent: Saturday, June 8, 2019 10:18 AM To: General Discussion: On-Topic Posts Subject: Re: HP9816 PAL16L8
L series are combinatorial only. You (or someone who has a working one) should be able to figure out a logic map by either running through all the input permutation or putting it in a reader that will do the same (vs reading the fuse data). -Alan Good luck. On 2019-06-08 11:05, Piero Andreini via cctech wrote: > desperately looking for jedec file of PAL16L8 position U69 part # > 1820-2991 for my HP9816