Paul, Sure! Always good to have more contacts in industry.
Thanks, Jonathan On Thu, Sep 19, 2019 at 8:57 PM Paul Anderson via cctalk < cctalk@classiccmp.org> wrote: > I know someone out west who makes boards for DEC systems. If you want , > I'll look for his contact info this weekend. > > Paul > > On Wed, Sep 18, 2019 at 4:09 PM systems_glitch via cctalk < > cctalk@classiccmp.org> wrote: > > > We have to clean it up but we've got the pattern for a quad height > > prototype board. I can share the outline and edge connectors once it's > 100% > > verified. > > > > Thanks, > > Jonathan > > > > On Tue, Sep 17, 2019 at 7:54 PM David Bridgham via cctalk < > > cctalk@classiccmp.org> wrote: > > > > > On 9/17/19 15:00, Ed Groenenberg via cctalk wrote: > > > > Hello. > > > > > > > > I'm looking for a PCB layout file / template of a 2 slot Unibus card, > > > > which I want to use in KiCad. > > > > > > > > Can someone help me with this? > > > > > > > > > Here's a KiCad template for a double-height QBUS card. I haven't > > > verified it or cleaned it up but it ought to make a good starting point > > > and deleting the QBUS bits will be easy. Eventually I'll need to do a > > > quad-height Unibus card too. > > > > > > http://pdp10.froghouse.org/qsic/qbus-template.tar.gz > > > > > > If you're building your own DEC boards, this is the best dimensional > > > diagram I've come across; I pulled it out of a uVAX manual. The one > bug > > > I've found in it is the "1.00±.010" in the corner where the edge > fingers > > > start. I think it's supposed to be "0.100±.010" but I'd double-check > > > that against other diagrams or measure a real board. > > > > > > http://pdp10.froghouse.org/qsic/qbus-dimensions.pdf > > > > > > > > > > > >
