On Mon, Nov 25, 2019 at 5:56 PM Rod Smallwood via cctalk <cctalk@classiccmp.org> wrote: > Hi Ethan > > Ok .. I now have dimensions and will add you to the list
Cool. Thanks. > I have only recently got back to doing panels after a break of a couple > of years. No worries. Good to hear your wife is on the mend. I'm in no hurry. I won't be doing any restoration work on the Straight-8s in the next year. My next big project is trying to get started on my 11/20. It has the plexi, so no worries there. It was stripped before I rescued it from a dumpster so I have to replace all the muffin fans and check to see if I have the power paddles or if I have to have some made. I definitely did not get the PSUs (those and the fans were kept) and I am likely to use modern equipment rather than try to source 50-year-old DEC linear PSUs. The target is to get it working by Spring 2022. After I get my -8/S up, then I'll probably try to tackle one of the Straight-8s, but I wanted to get in line for a plexi because the time to get one is when they are made, not 10 years later. Cheers, -ethan