My favorite BYTE issue had the HP 150 on the cover. It changed the entire direction of a segment of my business. My very first issues of BYTE and Kilobaud were a gift from Ray Morrison of Ill. Bell Teletype fame In today's world at the SMECC museum project BYTE and KILOBAUD and other serve as a reference source and we have bound sets of them and some loose ones that are easier to put in a scanner . The bound issues are better to flip through. They are also great to scan out of and a certain amount of up sizing can be done to imagery to be integrated into displays Ed#
In a message dated 6/2/2020 8:35:43 PM US Mountain Standard Time, cctalk@classiccmp.org writes: On Tue, Jun 2, 2020 at 7:15 PM Kevin Parker via cctalk <cctalk@classiccmp.org> wrote: > Do BYTE magazines have any collectability (maybe even from a historical > perspective or something else)? I know certain ones are sought after based on specific contributors or specific machines gracing the cover (Amiga, Apple, etc.) I'd say "value" fluctuates wildly and is definitely subjective. In my personal case, I'm fond of the issues before the PC took over because I started reading it in the early 80s and even though I didn't have a CP/M machine, I still read those articles with fascination (I devoured the hardware articles by Steve Ciarcia and others and anything for the PET or could be adapted to the PET). Specific ones, like the launch of the Amiga 3000 aside, I am not as interested in anything past the end of the 80s. Other people will have completely different opinions based on what content tickles them. Except for, say, the first few issues, it's not like they aren't somewhat abundant - issues were preserved by a lot of people. I am on my second set because I lost most of my originals in a flood 25 years ago. I did a rescue and was asked if I wanted 4 bankers boxes of Byte Magazines going back to the late 70s. How could I resist. As mentioned, many of them have been digitized and I do reference the PDFs a lot, but I still like the paper and being able to flop open to an ad or schematic and leave it open for reference. > I have to make some decisions about space (the perennial problem for a > collector of course) and I have quite a few of these taking up a few > shelves. Sure. That's always the challenge. I wish I had a better place for mine, but I'll have to rearrange a few things first. -ethan
