On Thu, 5 Nov 2020, "Enrico email.it" wrote:
How should we configure 22disk to be able to do the same thing on the B side
of the same floppy disk?
Inserting Side 2 in the definition table is not enough ....
Actually, it is almost that ;-)
I have a similar system, the fl100 floppy drive system, part of the
Grundig ptc100 (i.e. Mupid 2)
A: is side 0, and B: is side 1. Here's my 22disk definition for this.
Please note, the trick is to define a two-sided format for the second side
and first describe side 2 ! The definition of side 1 will be ignored
because the CP/M directory won't specify any block beyond the first side.
And of course, the track order is by cylinder, not by side.
BEGIN MUP1 Mupid Seite 1 - SSSD 96 tpi 5.25"
DENSITY FM ,LOW
CYLINDERS 80
SIDES 1
SECTORS 10,256
SIDE1 0 0,2,4,6,8,1,3,5,7,9
BSH 4 BLM 15 EXM 1 DSM 96 DRM 127 AL0 0C0H AL1 0 OFS 3
END
BEGIN MUP2 Mupid Seite 2 - SSSD 96 tpi 5.25"
DENSITY FM ,LOW
CYLINDERS 80
SIDES 2
SECTORS 10,256
SIDE2 0 0,2,4,6,8,1,3,5,7,9
SIDE1 0 0,2,4,6,8,1,3,5,7,9
ORDER CYLINDERS
BSH 4 BLM 15 EXM 1 DSM 96 DRM 127 AL0 0C0H AL1 0 OFS 3
END
Christian
