On Sat, Feb 6, 2021 at 4:33 PM Nigel Johnson via cctalk <cctalk@classiccmp.org> wrote: > > I have some 4608X-104-221/331L currently in my digikey shopping basket - > I will place order on Monday after I confirm that the two outside pins > go to Vcc and Fss and the six others go to signal pins on the bus. >
I pulled the SIP packs out of my EXB-8200 because it is mounted in an external case and the next time I go to use it I would probably attach an external terminator to it without thinking that it was terminated internally. I measured ~91-Ohm between pin 1 and pin 8, which is the expected value for (6x) (220-Ohm + 330-Ohm) in parallel. I measured ~163-Ohm between pin 1 and each of pin 2, 3, 4, 5, 6, 7. That is the expected value for 330-Ohm in parallel with (220-Ohm in series with 110-Ohm ((5x) (220-Ohm + 330-Ohm) in parallel). I measured ~145-Ohm between pin 8 and each of 2, 3, 4, 5, 6, 7. That is the expected value for 220-Ohm in parallel with (330-Ohm in series with 110-Ohm ((5x) (220-Ohm + 330-Ohm) in parallel). So a 4608X-104-221/331L should be a functional equivalent (220-Ohm in common to pin 8, 330-Ohm in common to pin 1).