FWIW, I have an MCS-8 User Manual I was about to give away. https://photos.google.com/photo/AF1QipPxTeFNI5YY-Ig_xZihpEyeaVjivCjDrU1_vmOa If either of you want it, it's yours.
On Wed, Mar 3, 2021 at 11:48 AM Bill Degnan via cctech < cct...@classiccmp.org> wrote: > Although this may not be what you're looking for, it's in the ballpark > (newer version?): Note the board part number and compare with yours, I > don't see off hand which board exactly you have. > https://www.vintagecomputer.net/intel/IMM_6-26/ > Bill > > On Wed, Mar 3, 2021 at 11:25 AM Jon Elson via cctech < > cct...@classiccmp.org> > wrote: > > > On 03/03/2021 07:17 AM, Roland via cctech wrote: > > > Hello everyone, > > > Does anyone have the Intellec MCS-8 8008 system monitor ROM files? > > > According to the Intellec MCS-8 manual the System Monitor is contained > > in five 1702A PROMs.My ROMs have a disk loader, but the disks system is > > long gone... > > > > > > Any papertape software is also welcome for this machine! > > > Thanks in advance!Regards, Roland Huisman > > > > > Wow, I have an old 8008-based embedded device I built back > > in 1976. It has the MCS 8008 CPU board, 1702 EPROM board and > > a RAM board. I never had the system monitor, I did > > everything on that project "bare iron". I think I did > > development with a PDP-11 and a homebrew cross assembler. > > > > Jon > > >