Hi Guy!
Thanks for the post and interesting. No it's not quite the exact power
supply but close. However....
Are you *sure* those cards are in the right slots?
Reason I am asking: When I look at the HP docs they label the
Pre-regulator board as A3A1. A3A1 also has the red LED. The inverter
board (the one with the transistors and transformers) is A3A2. Likewise
the battery charge boards are A3A3, A3A4, and the control board at the
end is A3A5.
The slots are labeled 1-5 with 1 being closest to the power cord and 5
being on the output end. A3A5 will only fit in slot 5, and A3A4 has the
12 volt trim pot that is accessible outside the supply by a cut-out so
it has to be in slot 4. Slot 3 is not used on my unit because I don't
have the battery backup circuits.
However in your picture slot 2 has the LED preregulator board and slot 1
has the one with the transistors and transformers (inverter). So either
your picture has the parts backwards or someone at HP should go to hell
for exceptionally bad numbering.
Does your supply work?
C
On 9/10/2021 12:43 PM, Guy Dunphy wrote:
Here are some disassembly pics of a HP 5061-6615 power supply.
http://everist.org/pics/hp1000_ps/5061-6615.zip 2.9M
Details:
HP 1000 Model 2113E SN 2340A03701 OPT 004 014
power supply Model 5061-6615 SN 2340
Not the exact same PS as yours, but it might help?
My problem is I haven't been able to find a manual and schematics for that
apparently late model supply. Though last time I looked was years ago.
The lack of a manual/schematics froze that restoration project.
Can anyone suggest where I might find a copy?
PDF, or I'd pay for an original paper copy. (To use, and also ensure it's
scanned in high quality.)
Guy
At 09:30 PM 9/09/2021 -0400, you wrote:
Quick question: I've been cleaning out and repairing an HP5061 supply
for a 1000 computer. However I didn't take a picture of the 4 boards
when I pulled them and I want to make sure they go in the right places.
From the manual (page 99 of 92851-90001_Sections-IXB_Mar-1981.pdf) the
slots are labeled A6-J1 through A6-J5. Does this mean that:
J1 is the
J5 is the control board (A3A5)
J4 is a jumper board for +12 adjustments
J3 is unused (battery backup boards)
J2 is the inverter board (A3A2)
J1 is the pre-regulator board (A3A1)
Seems right but I know how bad things can go :-)
Thanks!
C
