..the compatible Device for the Labtool-48 is the Dataman-48, Software is here: https://www.dataman.com/dataman-4848lv-resources
Regards, Holm ----- Forwarded message from Holm Tiffe <h...@freibergnet.de> ----- Date: Wed, 22 Sep 2021 07:45:32 +0200 From: Holm Tiffe <h...@freibergnet.de> To: Jonathan Stone <kiwi_jonat...@yahoo.com> Subject: Re: Burnable, patched Microvax-2000 SCSI-boot EPROM images? Ok..sounds good so far.. I have an Labtool-48 Programmer for example..thats an old Promer with an parallelport. Software is available for an OEM Device and I'm using that. Forgot in the moment what this was..but I can check that later. There are at least 3 Versions of the Promer that are more or less incompatible to the others, there are "upgrades", with other PCBs in there..last variant is able to do USB.. I'm owning the "plain" variant. Another from my stuff is an HiLo ALL07, and I have German made GALEP III and GALEP IV. All with Centronics Interface.. good Promers. I think it is ok to have old programmers (and old programmer-conterollers (old Laptops)) dedicated to them. I never had to program 3,3V Eproms an such things.. every time old Devices like Eproms, GALS or even TTL ROMs. 82S100 too.. I'm a german.. and sending Eproms from here seems to be the worst case to me... Regards, Holm A A A A A A A A Jonathan Stone wrote: > > > On Tuesday, September 21, 2021, 05:39:23 AM PDT, Holm Tiffe via cctalk > <cctalk@classiccmp.org> wrote: > > >I've tried this almost 2 years before..and it worked "somewhat". > >An VS2000 booted up in the first stage but the NetBSD Kernel couldn't > >mount root since nothing in the loader expected a disk at the NCR SCSI > >interface on the VS2000. Ragge agreed to look at this (bootcode) on my > >VS2000, but I'vwe couldn't get an ssh connection from the internet to > >an VS3100 M76 to which the VS2000 console was connected to..to work.. > > I once "owned" the NetBSD MIPS port, and I've done VAX assembly and kernel > code j(e.g., VMS device drivers). If I can't figure it out by comparison to > 3100 code, I'll contact Ragge and set up remote access via a BCC08, a NetBSD > laptop, and serial. (At least one of the VS200s is jumpered to Vaxstation > mode, and I have two GPX daughter-cards on order.) > > >For yure I could burn the proms, but I think I'm on the other side of > >the pond.. > > I am located in the San Francisco Bay Area. I came here for grad school and > never left. > > It may be time for me to buy a PROM programmer. Anyone got recommendations > for a budget device? "Amazon's choice" is > https://www.amazon.com/dp/B082D5NQ2P. The costlier option includes 10 > different sockets, and it claims support for 29xxx and 29Cxxx EPROMs, plus > lots of others. > > The DEC-badged Data-IO " on eBay is tempting, but expensive, and I don't know > where to find software. -- Technik Service u. Handel Tiffe, www.tsht.de, Holm Tiffe, Goethestrasse 15, 09569 Oederan, USt-Id: DE253710583 i...@tsht.de Fax +49 37292 709779 Tel +49 37292 709778 Mobil: 0172 8790 741 ----- End forwarded message ----- -- Technik Service u. Handel Tiffe, www.tsht.de, Holm Tiffe, Goethestrasse 15, 09569 Oederan, USt-Id: DE253710583 i...@tsht.de Fax +49 37292 709779 Tel +49 37292 709778 Mobil: 0172 8790 741
