Ya except his web page say no US sales... is he being flexible if one
asks nicely?
Steve
On 1/14/2022 9:16 AM, William Sudbrink wrote:
Oh, US source, no. You have to buy straight from Stephan.
But there is a guy on ebay who builds and sells them.
But you'll pay a premium. I considered it, but I like to build things myself.
The parts scavenger hunt? Not so much.
-----Original Message-----
From: cctalk [mailto:cctalk-boun...@classiccmp.org] On Behalf Of William
Sudbrink via cctalk
Sent: Friday, January 14, 2022 11:50 AM
To: 's shumaker' <shuma...@att.net>; 'General Discussion: On-Topic and Off-Topic
Posts' <cctalk@classiccmp.org>
Subject: RE: Retro Chip Tester Pro, US shopping basket?
He just added 2708 programming to it. Which is extremely useful.
-----Original Message-----
From: cctalk [mailto:cctalk-boun...@classiccmp.org] On Behalf Of s shumaker via
cctalk
Sent: Friday, January 14, 2022 11:20 AM
To: cctalk@classiccmp.org
Subject: Re: Retro Chip Tester Pro, US shopping basket?
Seems like a very useful gadget. Any suggestions for a US source?
Steve
On 1/13/2022 1:18 PM, Santo Nucifora via cctalk wrote:
Hi Bill,
I have a Digikey shopping cart for most of the items and another for
Mouser for the rest of the items but mine was Rev "i". I did this
back in August and I looked at the cart and noticed that some of the
items may have substitutes now. I know I had to do a few substitutes
when I followed the BOM even back then. I'll post them here but
please be careful and check the BOM from the RTC (Retro Chip Tester) Google
site you were emailed
against these carts. Again, you may have to make some substitutes and
some of the other components may not line up exactly but that's the
nature of these pre-created carts, unfortunately. It will at least
give you a good start: Note, I ordered from a Digikey.ca site but I
created an identical US cart for a friend in the US that was building one as
well.
Again, triple check everything.
Digikey US cart: https://www.digikey.com/short/d9vrt54z
Mouse CA cart for 4 items not at Digikey (but they may be there now?):
https://www.mouser.ca/ProjectManager/ProjectDetail.aspx?AccessID=9e707
cf7c4
BTW, good choice on a Christmas present. You will wonder how you did
without it.
Hope this helps,
Santo
On Thu, Jan 13, 2022 at 3:46 PM William Sudbrink via cctalk <
cctalk@classiccmp.org> wrote:
In response to my wife's "Buy yourself a Christmas present"
direction, I've ordered a Retro Chip Tested Pro board. When you
purchase the board, you get a BOM and links to stored shopping
baskets for some European vendors. Has anyone built this in the US
and stored their basket with a US vendor? Rev 1.2k by the way, but
any basket would be helpful as the BOM differences between the
versions are listed.
Thanks,
Bill S.
--
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
--
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
