Hi Mark, Thank you so much for this information! Seeing this, I was on the right track but was missing a few items. I typed this into a file on the PDP and ran it, but now it turns out I don't have the RSX11M.OLB file, so I guess I am just going to have to work on getting the sysgen stuff onto my disk.
Again, thank you very much for the info! -Peter On Mon, Dec 30, 2024 at 3:20 PM Mark Matlock <[email protected]> wrote: > Peter, > The command file below is from a SYSGEN driver build of DDDRV from my > system but I think it should work for yours. Note that OU: is defined by > the SYSGEN process and should be set as a logical to your system disk > (DL0:) or perhaps more simply just edited to be SY: Also, note that it uses > RSXVEC.STB which should work on the pregenned RL02 RSX11M+. > > [200,200]DDDRVBLD.CMD > ; > ; DDDRVBLD.CMD -- RSX-11M-PLUS loadable DD: driver build command file > ; > ; Created on 01-NOV-2024 at 14:00:05 > ; > OU:[1,54]DDDRV/-MM/-HD,SY:[1,34]DDDRV/SH/-SP,OU:[1,54]DDDRV= > SY:[1,24]RSX11M/LB:DDDRV:DDTAB > LB:[3,54]RSXVEC.STB/SS > LB:[1,1]EXELIB/LB > / > STACK=0 > PAR=DRVPAR:120000:20000 > / > > If for some reason you need to assemble the DDDRV driver below is the > SYSGEN produced assembly command files. > > > [200,200]DDDRVASM.CMD > ; > ; DDDRVASM.CMD -- RSX-11M-PLUS loadable DD: driver assembly command file > ; > ; Created on 01-NOV-2024 at 12:56:02 > ; > > OU:[11,24]DDDRV,LS:[11,34]DDDRV/-SP=IN:[1,1]EXEMC/ML,[11,10]RSXMC/PA:1,DDDRV > > OU:[11,24]DDTAB,LS:[11,34]DDTAB/-SP=IN:[1,1]EXEMC/ML,[11,10]RSXMC/PA:1,DDTAB > > Good Luck, > Mark > > > 1. I need some RSX11M+ TKB help (Peter Ekstrom) > > *From: *Peter Ekstrom <[email protected]> > *Subject: **[cctalk] I need some RSX11M+ TKB help* > *Date: *December 29, 2024 at 6:21:46 PM CST > *To: *"General Discussion: On-Topic and Off-Topic Posts" < > [email protected]> > *Reply-To: *"General Discussion: On-Topic and Off-Topic Posts" < > [email protected]> > > I have RSX11M+ 4.6 BL87 installed and running on my real PDP 11/23+ and > have gotten DECnet to work as well. But recently a need to access a TU58 > tape has come up, and turns out the DD driver on disk isn't built against > the correct RSX11M.STB file. So I need to, I guess, recreate the DDDRV.TSK > file. I have tried some very simplistic TKB commands but keep getting an > error saying a required file is missing. > > I don't have the sysgen stuff on this disk... What I have comes from the > pregenned RL02 image. > > Does anyone know how the TKB command line should look for this? I know, I > am looking for the easy way out. I have skimmed through some manuals but > nothing has stood out to me (I'm sure I missed it). > > Any help would be greatly appreciated. > > - Peter > >
