On 8/11/19 8:51 PM, Douglas Taylor via cctech wrote: > > The TC02 is an Emulex TS11 emulation for pertec interface tape drives. > The J1 and J2 are sort of standard terminology, don't know why.
Ah, the *Emulex* TC02. You had me going there--DEC also has a DECtape controller called the TC02. Looking at the TC02, there are 374s to latch data coming from the Qualstar and use the termination packs, but there are also 7438s driving the lines from the TC02 to the Qualstar. Those have no terminators. The TC02 reference manual says that you get run lines up to 30 feet long between the TC02 and formatter. My point is that the driver technology for the Qualstar (i.e. read data and status) is inappropriate for long cable runs. The spec calls for 48 ma OC drivers. --Chuck