Your mail is close to unreadable. Please confifgure your mailer correctly.
It looks like your drive does not support DAO recording.
For a proper error report please read:
http://www.fokus.gmd.de/research/cc/glone/employees/joerg.schilling/private/problems.html
>From: Udo Weber <[EMAIL PROTECTED]>
>since a long time I try to configure the CD-burning on Mandrake,
> I don't have success until now. I tryed this on two completly different
> systems - always the same.
> Always when I try to burn, eg. with X-cd-roast, I get following error:
>pregap1:
>-1
>Cdrecord 1.9 (i586-mandrake-linux-gnu) Copyright (C) 1995-2000 J�rg
>Schilling
>TOC Type: 1 =
>CD-ROM
>scsidev:
>'0,1,0'
>scsibus: 0 target: 1 lun:
>0
>Linux sg driver version:
>2.1.39
>Using libscg version
>'schily-0.1'
>atapi:
>1
>Device type : Removable
>CD-ROM
>Version :
>0
>Response Format:
>1
>Vendor_info : 'IDE-CD
>'
>Identifikation : 'R/RW 4x4x32
>'
>Revision :
>'1.3B'
>Device seems to be: Generic mmc
>CD-RW.
>Using generic SCSI-3/mmc CD-R driver
>(mmc_cdr).
>Driver flags :
>SWABAUDIO
>Drive buf size : 1572864 = 1536
>KB
>FIFO size : 4194304 = 4096
>KB
>Track 01: data 628 MB padsize: 30
>KB
>Total size: 721 MB (71:28.30) = 321623
>sectors
>Lout start: 721 MB (71:30/23) = 321623
>sectors
>Current Secsize:
>2048
>ATIP info from
>disk:
>Indicated writing power:
>5
>Is not
>unrestricted
>Is not
>erasable
>ATIP start of lead in: -11324
>(97:31/01)
>ATIP start of lead out: 359849
>(79:59/74)
>Disk type: Long strategy type (Cyanine, AZO or
>similar)
>Manuf. index:
>22
>Manufacturer: Ritek
>Co.
>Blocks total: 359849 Blocks current: 359849 Blocks remaining:
>38226
>Starting to write CD/DVD at speed 2 in write mode for single
>session.
>Waiting for reader process to fill input buffer
>...
>input buffer
>ready.
>cdrecord: Input/output error. mode select g1: scsi sendcmd: retryable
>error
>CDB: 55 10 00 00 00 00 00 00 3C
>00
>status: 0x2 (CHECK
>CONDITION)
>Sense Bytes: 70 00 05 00 00 00 00 13 00 00 00 00 26 00 00
>00
>cdrecord: Warning: using default CD write parameter
>data.
>Sense Key: 0x5 Illegal Request, Segment
>0
>cdrecord: Cannot open new
>session.
>Sense Code: 0x26 Qual 0x00 (invalid field in parameter list) Fru
>0x0
>Sense flags: Blk 0 (not
>valid)
>cmd finished after 0.007s timeout
>200s
>Mode Select Data 00 11 00 00 05 32 02 00 00 00 00 00 00 00 00 00 00 00
>00 96 00 00 00 0
>0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>00 00 00 00 00 0
>0 00 00
>00
>cdrecord: fifo had 64 puts and 0
>gets.
>*******************************************************************************
>Here are some infos about the system:
>Mandrake 7.2
>kernel 2.2.17-21
>CDROM as 2nd Master, CDRW as 2nd Slave
>dmesg:
>Adding Swap: 530104k swap-space (priority
>-1)
>scsi0 : SCSI host adapter emulation for IDE ATAPI
>devices
>scsi : 1
>host.
> Vendor: E-IDE Model: CD-ROM 50X L Rev:
>15
> Type: CD-ROM ANSI SCSI revision:
>02
>Detected scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun
>0
> Vendor: IDE-CD Model: R/RW 4x4x32 Rev:
>1.3B
> Type: CD-ROM ANSI SCSI revision:
>02
>Detected scsi CD-ROM sr1 at scsi0, channel 0, id 1, lun
>0
>sr0: scsi3-mmc drive: 50x/50x cd/rw xa/form2 cdda
>tray
>Uniform CD-ROM driver Revision:
>3.11
>sr1: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda
>tray
>ne2k-pci.c:vpre-1.00e 5/27/99 D. Becker/P. Gortmaker
>http://cesdis.gsfc.nasa.gov
>dmesg when mounting a CD:
>VFS: Disk change detected on device
>sr(11,0)
>ISO 9660 Extensions:
>RRIP_1991A
>
>
>VFS: Disk change detected on device
>sr(11,1)
>ISO 9660 Extensions:
>RRIP_1991A
>[root@linux /root]# cdrecord
>-scanbus
>Cdrecord 1.9 (i586-mandrake-linux-gnu) Copyright (C) 1995-2000 J�rg
>Schilling
>Linux sg driver version:
>2.1.39
>Using libscg version
>'schily-0.1'
>scsibus0:
>
>cdrecord: Warning: controller returns wrong size for CD capabilities
>page.
> 0,0,0 0) 'E-IDE ' 'CD-ROM 50X L ' '15 ' Removable
>CD-ROM
> 0,1,0 1) 'IDE-CD ' 'R/RW 4x4x32 ' '1.3B' Removable
>CD-ROM
> 0,2,0 2)
>*
> 0,3,0 3)
>*
> 0,4,0 4)
>*
> 0,5,0 5)
>*
> 0,6,0 6)
>*
> 0,7,0 7)
>*
>>From my point of view all works well for reading CD's. But I'm not able
>to write any.
>I used new and different media-types.
>Can anyone help me to solve this problem, what should I do to solve this
>problem ?
>Thanks for any help
>Udo
>--
>To UNSUBSCRIBE, email to [EMAIL PROTECTED]
>with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
J�rg
EMail:[EMAIL PROTECTED] (home) J�rg Schilling D-13353 Berlin
[EMAIL PROTECTED] (uni) If you don't have iso-8859-1
[EMAIL PROTECTED] (work) chars I am J"org Schilling
URL: http://www.fokus.gmd.de/usr/schilling ftp://ftp.fokus.gmd.de/pub/unix
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
