Hey, I was wondering if anybody could give me some tips on why my CD-R might not be working. It's an Artec 8x4x32, IDE on kernel 2.2.16 (stock RH7), with ide-scsi mapping /dev/hdd -> /dev/scd0. I can burn TAO, DAO, and data just fine from Windows (Nero 5), as well as TAO and data under linux. When I try to burn as DAO under Linux, I get this output (the error happens *immediately* after the countdown ends -- no delay): megacz@localhost$ls 01.wav 02.wav megacz@localhost$file * 01.wav: RIFF (little-endian) data, WAVE audio, Microsoft PCM, 16 bit, stereo 44100 Hz 02.wav: RIFF (little-endian) data, WAVE audio, Microsoft PCM, 16 bit, stereo 44100 Hz megacz@localhost$sudo cdrecord --dev=0,0,0 -dao -audio -pad -eject *.wav Cdrecord 1.9 (i686-pc-linux-gnu) Copyright (C) 1995-2000 J Device type : Removable CD-ROM Version : 0 Response Format: 1 Vendor_info : 'IDE-CD ' Identifikation : 'R/RW 8x4x32 ' Revision : ' 1.5' Device seems to be: Generic mmc CD-RW. Using generic SCSI-3/mmc CD-R driver (mmc_cdr). Driver flags : SWABAUDIO Starting to write CD/DVD at speed 4 in write mode for single session. Last chance to quit, starting real write in 1 seconds. cdrecord: Input/output error. mode select g1: scsi sendcmd: retryable error CDB: 55 10 00 00 00 00 00 00 3C 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 00 00 00 00 13 00 00 00 00 26 00 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x26 Qual 0x00 (invalid field in parameter list) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.003s timeout 200s cdrecord: Warning: using default CD write parameter data. Mode Select Data 00 11 00 00 05 32 02 00 00 00 00 00 00 00 00 00 00 00 00 96 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 cdrecord: Cannot open new session. No data is written to the disc. I get the same error with -speed=1 as well. Any ideas on what might be causing this? Thanks for any help! - a -- "Nobody has any 'Rights'. We are entitled only to Liberties" -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
