hello everyone...

i installed my supervisors cd writer some time ago (yes, im still a student
;o) and everything was working fine. no problems. burning disks that were
data and audio was a synch. but now he is getting the following error and i
cant seem to figure out what the problem is. this is a redhat linux 7.0 box
running on a duron 600mhz with 128mb ram and an acer 8x4x32x cdrw. any
ideas? another symptom is that even when the cdrecord command is 'finished'
and the xterm prompt comes back, the cd record light on the drive is still
on... as if it is burning. but nothing is happening.

ivan.


----- Original Message -----
From: "Fabio Frescura" <[EMAIL PROTECTED]>
To: "Ivan Stegic" <[EMAIL PROTECTED]>
Sent: Thursday, December 14, 2000 11:15 AM
Subject: Re: default cd player


:
: Hello Ivan,
:
: Here is a transcript of the errors, as requested. It took a long time
typing
: them out (just joking!).
:
: Fabio[
:
: ************************************************************************
:
: [root@muaddib /cd-images]# cdrecord -v -dao -audio 0_*.wav
: Cdrecord 1.9 (i686-pc-linux-gnu) Copyright (C) 1995-2000 J�rg Schilling
: TOC Type: 0 = CD-DA
: scsidev: '0,0,0'
: scsibus: 0 target: 0 lun: 0
: Linux sg driver version: 2.1.38
: Using libscg version 'schily-0.1'
: atapi: 1
: Device type    : Removable CD-ROM
: Version        : 0
: Response Format: 1
: Vendor_info    : 'ATAPI   '
: Identifikation : 'CD-R/RW 8X4X32  '
: Revision       : '5.DW'
: Device seems to be: Generic mmc CD-RW.
: Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
: Driver flags   : SWABAUDIO
: Drive buf size : 1632256 = 1594 KB
: FIFO size      : 4194304 = 4096 KB
: Track 01: audio  34 MB (03:26.46) no preemp
: Track 02: audio  33 MB (03:17.90) no preemp
: Track 03: audio  15 MB (01:30.13) no preemp
: Track 04: audio  60 MB (06:01.86) no preemp
: Track 05: audio  49 MB (04:54.22) no preemp
: Track 06: audio  58 MB (05:44.84) no preemp
: Track 07: audio  44 MB (04:23.29) no preemp
: Track 08: audio  40 MB (03:58.10) no preemp
: Track 09: audio  84 MB (08:22.89) no preemp
: Track 10: audio  71 MB (07:07.90) no preemp
: Track 11: audio  34 MB (03:27.53) no preemp
: Total size:     527 MB (52:15.17) = 235138 sectors
: Lout start:     527 MB (52:17/13) = 235138 sectors
: Current Secsize: 2048
: ATIP info from disk:
:   Indicated writing power: 5
:   Is not unrestricted
:   Is not erasable
:   ATIP start of lead in:  -11080 (97:34/20)
:   ATIP start of lead out: 335100 (74:30/00)
: Disk type:    Long strategy type (Cyanine, AZO or similar)
: Manuf. index: 11
: Manufacturer: Mitsubishi Chemical Corporation
: Blocks total: 335100 Blocks current: 335100 Blocks remaining: 99962
: RBlocks total: 342460 RBlocks current: 342460 RBlocks remaining: 107322
: Starting to write CD/DVD at speed 8 in write mode for single session.
: Last chance to quit, starting real write in 1 seconds.
: Waiting for reader process to fill input buffer ... input buffer ready.
: Performing OPC...
: Sending CUE sheet...
: cdrecord: WARNING: Drive returns wrong startsec (0) using -150
: Writing pregap for track 1 at -150
: Starting new track at sector: 0
: Track 01:   0 of  34 MB written.cdrecord: Input/output error. write_g1:
scsi sendcmd: retryable error
: CDB:  2A 00 00 00 01 44 00 00 1B 00
: status: 0x2 (CHECK CONDITION)
: Sense Bytes: 91 86 00 41 15 42 00 07 40 28 A9 24 A2 50 69 10
: Sense Key: 0xFFFFFFFF [], Segment 0
: Sense Code: 0x11 Qual 0x00 (unrecovered read error) Fru 0x0
: Sense flags: Blk 8781889 (valid)
:
: write track data: error after 762048 bytes
: Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00
: Writing  time:    7.540s
: Fixating...
: cdrecord: Input/output error. flush cache: scsi sendcmd: retryable error
: CDB:  35 00 00 00 00 00 00 00 00 00
: status: 0x2 (CHECK CONDITION)
: Sense Bytes: 70 00 03 00 00 00 00 0A 00 00 00 00 02 FF 00 00
: Sense Key: 0x3 Medium Error, Segment 0
: Sense Code: 0x02 Qual 0xFF (no seek complete) [No matching qualifier] Fru
0x0
: Sense flags: Blk 0 (not valid)
: Trouble flushing the cache
: cdrecord: Input/output error. test unit ready: scsi sendcmd: retryable
error
: CDB:  00 00 00 00 00 00
: status: 0x2 (CHECK CONDITION)
: Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 3A 00 00 00
: Sense Key: 0x2 Not Ready, Segment 0
: Sense Code: 0x3A Qual 0x00 (medium not present) Fru 0x0
: Sense flags: Blk 0 (not valid)
: Fixating time:   52.289s
: cdrecord: fifo had 76 puts and 13 gets.
: cdrecord: fifo was 0 times empty and 5 times full, min fill was 95%.
:
:
:
:
:


--  
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Reply via email to