Envrionment:
AMD K6II w/128Mb
RedHat Linux 7.0 upgraded to kernel 2.2.18
Tekram 390U2W
Yamaha CDR8424 internal
CDRecord 1.9
XCDRoast 0.98a7
Whenever I attempt to burn a data CD-R using XCDRoast, I get the output
shown below from CDRecord. This happens consistently; I've tried several
different medias (BASF, Maxell, etc.), I've tried several different kernels,
from 2.2.16 to 2.2.18. I've tried removing the drive and running it from a
friend's box and that worked, so I don't suspect the drive. The Tekram
controller also runs 3 HDs, so I can't see how that could be the problem.
Any advice? I'd sure appreciate it...!
Jim
pregap1: -1
Cdrecord 1.9 (i586-pc-linux-gnu) Copyright (C) 1995-2000 Jörg Schilling
TOC Type: 1 = CD-ROM
scsidev: '0,1,0'
scsibus: 0 target: 1 lun: 0
Linux sg driver version: 2.1.39
Using libscg version 'schily-0.1'
atapi: 0
Device type : Removable CD-ROM
Version: 2
Response Format: 2
Capabilities: SYNC
Vendor_info: 'YAMAHA '
Identifikation: 'CRW8424S '
Revision: '1.0j'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : SWABAUDIO
Drive buf size : 3172848 = 3098 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 131 MB padsize: 30 KB
Total size: 151 MB (15:00.02) = 67502 sectors
Lout start: 151 MB (15:02/02) = 67502 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 5
Is not unrestricted
Is not erasable
Disk sub type: Medium Type A, high Beta category (A+) (3)
ATIP start of lead in: -11634 (97:26/66)
ATIP start of lead out: 359849 (79:59/74)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 3
Manufacturer: CMC Magnetics Corporation
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 292347
Starting to write CD/DVD at speed 8 in write mode for single session.
Waiting for reader process to fill input buffer ...
input buffer ready.
Performing OPC...
Sending CUE sheet...
Writing pregap for track 1 at -150
Starting new track at sector: 0
CDB: 2A 00 00 00 07 25 00 00 1F 00
cdrecord: Input/output error. write_g1: scsi sendcmd: retryable error
Sense Bytes: 70 00 03 00 00 00 00 0A 00 00 00 00 0C 0A 00 00
status: 0x2 (CHECK CONDITION)
Sense Key: 0x3 Medium Error, Segment 0
Sense Code: 0x0C Qual 0x0A (write error - padding blocks added) Fru 0x0
Sense flags: Blk 0 (not valid)
write track data: error after 3745792 bytes
cdrecord: fifo had 123 puts and 60 gets.
Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00
cdrecord: fifo was 0 times empty and 41 times full, min fill was 95%.
Writing time: 236.314s
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
