Hi
After advising another poster to upgrade his Plextor firmware version, I
thought I'd better look at the Plextor web site to see if I needed to do the
same. There was a 1.08 version of firmware for my drive (currently 1.07),
so I downloaded it.
I also downloaded the following Plextor firmware upgrade utility files from
Jorg's FTP site, being careful to use BINARY mode, but can't get them to run
on my system. Previous firmware upgrades were done using Windows 9x with no
problems, but now I've got it connected to Linux, I thought I might as well
try to do it locally (rather than move the drive around to another machine).
[root@engcdburner bin]# ll px*
-rwxr-xr-x 1 root root 67394 Jan 22 11:26
pxupdate-1.15-i586-linux
-rwxr-xr-x 1 root root 73311 Jan 22 11:26
pxupdate-1.18-i586-linux
[root@engcdburner bin]#
It looks like it downloaded OK, and it appears to be a recognisable
executable as far as the OS appears to be concerned
[root@engcdburner bin]# file pxupdate-1.18-i586-linux
pxupdate-1.18-i586-linux: ELF 32-bit LSB executable, Intel 80386, version 1,
dynamically linked (uses shared libs), not stripped
(same thing happens for the 1.15 version)
Yet when I try to run it I get:
[root@engcdburner bin]# ./pxupdate-1.18-i586-linux
bash: ./pxupdate-1.18-i586-linux: No such file or directory
(same thing happens for the 1.15 version)
My operating system details as follows:
[root@engcdburner bin]# uname -a
Linux engcdburner.au.otis.com 2.2.16-22 #1 Tue Aug 22 16:16:55 EDT 2000 i586
unknown
This is RedHat 7.0 on a Pentium 166/MMX
Any ideas or help appreciated
Jason
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
