Hi,
Is anyone able ot help me with this issue?
The machine I am running it on is HW/SW identical to another machine
which is using an HP
Identifikation : 'CD-Writer+ 9300 '
Both are Soltek MB, VIA Chipset and Athlon 1000MHz with Redhat 7.1 using
xcdroast with
cdrecord-1.9-6:
/usr/bin/cdrecord dev=0,0,0 fs=10240k -v -useinfo speed=8 -dao -eject
-pad -data "/home/cdrw/track-01.img"
I get the following whe I attempt to write to the drive:
pregap1: -1
Cdrecord 1.9 (i686-pc-linux-gnu) Copyright (C) 1995-2000 Jörg Schilling
TOC Type: 1 = CD-ROM
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.1.17
Using libscg version 'schily-0.1'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'HP '
Identifikation : 'CD-Writer+ 9100c'
Revision : 'H2,1'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : SWABAUDIO
Drive buf size : 1572864 = 1536 KB
FIFO size : 10485760 = 10240 KB
Track 01: data 649 MB padsize: 30 KB
Total size: 745 MB (73:52.56) = 332442 sectors
Lout start: 746 MB (73:54/42) = 332442 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 4
Is not unrestricted
Is not erasable
Disk sub type: Medium Type A, high Beta category (A+) (3)
ATIP start of lead in: -11849 (97:24/01)
ATIP start of lead out: 336075 (74:43/00)
Disk type: Long strategy type (Cyanine, AZO or similar)
Manuf. index: 25
Manufacturer: Taiyo Yuden Company Limited
Blocks total: 336075 Blocks current: 336075 Blocks remaining: 3633
RBlocks total: 346856 RBlocks current: 346856 RBlocks remaining: 14414
Starting to write CD/DVD at speed 8 in write mode for single session.
Last chance to quit, starting real write in 1 seconds.
Waiting for reader process to fill input buffer ... input buffer ready.
/usr/bin/cdrecord: Input/output error. mode select g1: scsi sendcmd:
retryable error
CDB: 55 10 00 00 00 00 00 00 3C 00
status: 0x0 (GOOD STATUS)
cmd finished after 0.003s timeout 200s
/usr/bin/cdrecord: Warning: using default CD write parameter data.
Mode Select Data 00 11 00 00 05 32 02 00 00 00 00 00 00 00 00 00 00 00
00 96 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00
/usr/bin/cdrecord: Cannot open new session.
/usr/bin/cdrecord: fifo had 160 puts and 0 gets.
/usr/bin/cdrecord: fifo was 0 times empty and 0 times full, min fill was
100%.
Don't know if you will have time to help me. The drive is an HP 9100c
drive as follows:
[root@skink <mailto:root@skink> /etc]# cdrecord -scanbus
Cdrecord 1.9 (i686-pc-linux-gnu) Copyright (C) 1995-2000 Jörg Schilling
Linux sg driver version: 3.1.17
Using libscg version 'schily-0.1'
scsibus0:
0,0,0 0) 'HP ' 'CD-Writer+ 9100c' 'H2,1' Removable CD-ROM
0,1,0 1) *
0,2,0 2) *
0,3,0 3) *
0,4,0 4) *
0,5,0 5) *
0,6,0 6) *
0,7,0 7) *
[root@skink <mailto:root@skink> /etc]# cdrecord dev=0,0 -inq
Cdrecord 1.9 (i686-pc-linux-gnu) Copyright (C) 1995-2000 Jörg Schilling
scsidev: '0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.1.17
Using libscg version 'schily-0.1'
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'HP '
Identifikation : 'CD-Writer+ 9100c'
Revision : 'H2,1'
Device seems to be: Generic mmc CD-RW.
[root@skink <mailto:root@skink> /etc]#
best regards and thanks in advance
Mark
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
