>From: [EMAIL PROTECTED]
>To: [EMAIL PROTECTED], [EMAIL PROTECTED]
>Subject: Re: WAVs?
>Date: Wed, 11 Jul 2001 17:15:18 +0200 (MEST)
>
> >X-Originating-IP: [212.239.175.3]
>
> >> >  Cdrecord 1.11a05 (alphaev56-unknown-linux-gnu) Copyright (C) 
>1995-2001
> >> >J�rg Schilling
> >> >  scsidev: '1,4,0'
> >> >  scsibus: 1 target: 4 lun: 0
> >> >  Linux sg driver version: 2.1.39
> >> >  Using libscg version 'schily-0.5'
> >> >  Device type    : Removable WORM
> >> >  Version        : 2
> >> >  Response Format: 2
> >> >  Capabilities   : SYNC LINKED
> >> >  Vendor_info    : 'T.YUDEN '
> >> >  Identifikation : 'CD-WO EW-50     '
> >> >  Revision       : '2.16'
> >> >  Device seems to be: Philips CDD-521.
> >> >Perhaps the Philips CDD-521 does require byteswab and my t.yuden 
>doesn't
> >>or
> >>Now it looks different. You are the second person in 5 years who reports 
>to
> >>use
> >>this drive.
> >>
> >>It indeed may be that it uses a different audio byte oder.
> >>
> >>If your audio data has beed extracted by cdda2wav (so I may 100% believe
> >>that
> >>the byteorder is OK) and cdrecord does not write the expected byte order
> >>then we need to
> >>add a driver entry for this drive.
>
> >"so I may 100% believe that the byteorder is OK"
> >The wav i've tried was made with WinAmp and the Diskwriter output plugin 
>for
> >it on Win2k, so i'm sure the byteorder is 100% OK (it plays on every 
>system
> >i've tried).
>
>Mmmm it looks as if you don't have a intel based system. Where did you test 
>your
>wav files?

I've made the wav files on Win2k on Intel. I've tried to play them on Intel 
and also on Linux for Alpha. On both platforms they play correct. The 
cdwriter is located on the Alpha platform.

>
> >PS: this drive also has a problem with telling which speed it is, i get 
>the
> >following warning with cdrecord. I have to manually set the speed to 2.
>
> >Using driver for Philips CDD-521 (philips_cdd521).
> >Driver flags   :
> >Supported modes: TAO
> >cdrecord: Warning: blockdesc secsize 2048 differs from cap secsize 0
> >Disk bar code: 00 00 00 0A F1 00 00 00 00 00 00 00 00 00
> >cdrecord: Warning: controller returns zero sized Speed/Dummy information
> >page.
> >cdrecord: Warning: controller returns wrong size for Speed/Dummy 
>information
> >page.
> >cdrecord: Warning: controller returns wrong page 0 for Speed/Dummy
> >information page (23).
>
>Interesting! There is a bar code so it loos as if this is a CDD-521.
>Why should Tayo Yuden modify the firmware to have a different audio
>byte order?

I have no idea, could it be because it's a very old drive? Perhaps back 
then, there weren't any standards on the byte order?

>
>Are you sure that the drive was not hung when you tested?

What do you mean with "hung"?
The writing proces finishes normally after fixating the disc.

>
>J�rg
>
>  EMail:[EMAIL PROTECTED] (home) J�rg Schilling D-13353 
>Berlin
>        [EMAIL PROTECTED]             (uni)  If you don't have iso-8859-1
>        [EMAIL PROTECTED]         (work) chars I am J"org Schilling
>  URL:  http://www.fokus.gmd.de/usr/schilling   
>ftp://ftp.fokus.gmd.de/pub/unix

_________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.


--  
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Reply via email to