I am burning on Red Hat 7.1 with the Plextor 12/10/32S drive (with the latest firmware updates). I am consistantly getting errors, about one out of every 7. The errors I get are detailed below. In addition whenever I set the speed of the burn to 2 (via speed=2 on the command line) cdrecord still ends up burning at speed 1. The CD-Rs are 80 minute medical grade that are 6X write compatible. Any suggestions for either issure?
Brian ============================= Cdrecord-ProDVD 1.11a07 (i586-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilli ng Using libscg version 'schily-0.5' Device type : Removable CD-ROM Version : 2 Response Format: 2 Capabilities : SYNC LINKED Vendor_info : 'PLEXTOR ' Identifikation : 'CD-R PX-W1210S' Revision : '1.03' Device seems to be: Generic mmc CD-RW. Using generic SCSI-3/mmc CD-R driver (mmc_cdr). Driver flags : SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R scsidev: '1,6,0' scsibus: 1 target: 6 lun: 0 Linux sg driver version: 3.1.17 Starting to write CD/DVD at speed 1 in write mode for single session. /opt/schily/bin/cdrecord: Input/output error. write_g1: scsi sendcmd: no error CDB: 2A 00 00 00 6E 32 00 00 1F 00 status: 0x2 (CHECK CONDITION) Sense Bytes: F0 00 03 00 00 6E C8 0A 00 00 00 00 0C 07 00 00 Sense Key: 0x3 Medium Error, Segment 0 Sense Code: 0x0C Qual 0x07 (write error - recovery needed) Fru 0x0 Sense flags: Blk 28360 (valid) cmd finished after 0.002s timeout 40s Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00 write track data: error after 57774080 bytes -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]