Hi, about one month ago I recognized that my Plextor 412 (which worked very well for several years now) can't burn faster than 1x anymore under FreeBSD 4.4-STABLE. I'm not quite sure if this is a FreeBSD problem, a cdrecord problem or a problem of the drive itself. Here's what I get when I try to burn some image faster than 1x:
---8<--- [root@leelou dump]# cdrecord speed=4 dev=0,4,0 -v -eject -dummy image.iso Cdrecord 1.10 (i386-unknown-freebsd4.4) Copyright (C) 1995-2001 J�rg Schilling TOC Type: 1 = CD-ROM scsidev: '0,4,0' scsibus: 0 target: 4 lun: 0 Using libscg version 'schily-0.5' atapi: 0 Device type : Removable CD-ROM Version : 2 Response Format: 2 Capabilities : SYNC LINKED Vendor_info : 'PLEXTOR ' Identifikation : 'CD-R PX-R412C ' Revision : '1.07' Device seems to be: Generic mmc CD-R. Using generic SCSI-3/mmc CD-R driver (mmc_cdr). Driver flags : SWABAUDIO Drive buf size : 2097152 = 2048 KB FIFO size : 4194304 = 4096 KB Track 01: data 84 MB Total size: 96 MB (09:34.74) = 43106 sectors Lout start: 97 MB (09:36/56) = 43106 sectors Current Secsize: 2048 ATIP info from disk: Indicated writing power: 5 Is unrestricted Is not erasable ATIP start of lead in: -11839 (97:24/11) ATIP start of lead out: 336075 (74:43/00) Disk type: Long strategy type (Cyanine, AZO or similar) Manuf. index: 24 Manufacturer: SONY Corporation Blocks total: 336075 Blocks current: 336075 Blocks remaining: 292969 Starting to write CD/DVD at speed 4 in dummy mode for single session. Last chance to quit, starting dummy write in 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... input buffer ready. Starting new track at sector: 0 Track 01: 0 of 84 MB written.cdrecord: Input/output error. write_g1: scsi sendcmd: retryable error CDB: 2A 00 00 00 01 F0 00 00 1F 00 status: 0x2 (CHECK CONDITION) Sense Bytes: F0 00 03 00 00 02 86 0A 00 00 00 00 0C 07 00 00 00 00 Sense Key: 0x3 Medium Error, Segment 0 Sense Code: 0x0C Qual 0x07 (write error - recovery needed) Fru 0x0 Sense flags: Blk 646 (valid) resid: 63488 cmd finished after 0.006s timeout 40s write track data: error after 1015808 bytes Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00 Writing time: 8.061s Fixating... WARNING: Some drives don't like fixation in dummy mode. Fixating time: 0.002s cdrecord: fifo had 80 puts and 17 gets. cdrecord: fifo was 0 times empty and 13 times full, min fill was 96%. ---8<--- I tried different media too, no luck. Anyone of you knows that problem? regards, le -- Lukas Ertl eMail: [EMAIL PROTECTED] UNIX-Systemadministrator Tel.: (+43 1) 4277-14073 Zentraler Informatikdienst (ZID) Fax.: (+43 1) 4277-9140 der Universit�t Wien http://mailbox.univie.ac.at/~le/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
