Is there support in cdrecord/cdrdao for this DVD writer?

I get the following error when running a test with cdrecord:

cuatro:/home/backup> sudo cdrecord -v dev=0,0,0 -dummy -speed=2 fs=8m -data prueba4.raw
Cdrecord 1.10 (i686-pc-linux-gnu) Copyright (C) 1995-2001 J�rg Schilling
TOC Type: 1 = CD-ROM
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.1.22
Using libscg version 'schily-0.5'
atapi: 1
Device type    : Removable CD-ROM
Version        : 0
Response Format: 2
Capabilities   :
Vendor_info    : 'PIONEER '
Identifikation : 'DVD-RW  DVR-103 '
Revision       : '1.55'
Device seems to be: Generic mmc2 DVD.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags   : SWABAUDIO
Drive buf size : 1251328 = 1222 KB
FIFO size      : 8388608 = 8192 KB
Track 01: data   35 MB
Total size:      41 MB (04:05.14) = 18386 sectors
Lout start:      41 MB (04:07/11) = 18386 sectors
cdrecord: Input/output error. test unit ready: scsi sendcmd: no error
CDB:  00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 02 00 00 00 00 0E 00 00 00 00 30 00 00 00
Sense Key: 0x2 Not Ready, Segment 0
Sense Code: 0x30 Qual 0x00 (incompatible medium installed) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.005s timeout 40s
cdrecord: No disk / Wrong disk!


Thanks in advance,
m4c.




--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Reply via email to