>From: Greg Wooledge <[EMAIL PROTECTED]>

>My first thought, of course, is that the DVD-R disc itself was
>defective.  But I only have 3 of them (oops!  make that 2 now), and

Which is in principle correct!

>I can't get hold of any DVD-RWs at the moment, since our supplier is
>out of both brands that they sell.  So I'm reluctatant to throw
>another DVD-R in and try again without understanding exactly what
>went wrong the first time.

>Has anyone else (in the world?) written a DVD under HP-UX yet?  Have
>I done something wrong, or is this just a bad disc?  Is there something
>I should do differently to improve my chances of success?  Should I
>go shopping for a DVD-RW in a local retail store and hope to be
>reimbursed for it by the local bureaucracy eventually? :-/

>Here is the full output:

>scsidev: '1,0,0'
>scsibus: 1 target: 0 lun: 0
>Cdrecord-ProDVD-Clone 2.0 (hppa1.1-hp-hpux10.20) Copyright (C) 1995-2002 JM-vrg 
>Schilling
>Unlocked features: ProDVD Clone 
>Limited  features: speed 
>This copy of cdrecord is licensed for: private/research/educational_non-commercial_use
>TOC Type: 1 = CD-ROM
>Using libscg version 'schily-0.7'
>atapi: 0
>Device type    : Removable CD-ROM
>Version        : 2
>Response Format: 2
>Capabilities   : SYNC 
>Vendor_info    : 'SONY    '
>Identifikation : 'DVD RW DRU-500A '
>Revision       : '1.0f'
>Device seems to be: Generic mmc2 DVD-R/DVD-RW.
>Using generic SCSI-3/mmc-2 DVD-R/DVD-RW driver (mmc_dvd).
>Driver flags   : DVD SWABAUDIO BURNFREE 
>Supported modes: TAO PACKET SAO SAO/R96R RAW/R96R
>Drive buf size : 8126464 = 7936 KB
>FIFO size      : 4194304 = 4096 KB
>Track 01: data  1024 MB        
>Track 02: data  1024 MB        
>Track 03: data  1024 MB        
>Track 04: data  1024 MB        
>Track 05: data   310 MB        
>Total size:     4406 MB = 2256048 sectors
>Current Secsize: 2048
>Blocks total: 2298496 Blocks current: 2298496 Blocks remaining: 42448
>Starting to write CD/DVD at speed 2 in real TAO mode for single session.
>Last chance to quit [...]
>Waiting for reader process to fill input buffer ... input buffer ready.
>BURN-Free is ON.
>Turning BURN-Free off
>Compiling virtual track list ...
>Vtrack:  1 size: 1073764352 bytes 1073764352 rounded (524299 sectors)
>Vtrack:  2 size: 1073762304 bytes 1073762304 rounded (524298 sectors)
>Vtrack:  3 size: 1073762304 bytes 1073762304 rounded (524298 sectors)
>Vtrack:  4 size: 1073762304 bytes 1073762304 rounded (524298 sectors)
>Vtrack:  5 size: 325335040 bytes 325335040 rounded (158855 sectors)
>Vtracks: 5 size: 4620386304 bytes 4620386304 rounded (2256048 sectors) total
>Starting new track at sector: 0
>Track 01:    0 of 1024 MB written. [...]
>Track 02:  980 of 1024 MB written (fifo  98%)   2.1x.cdrecord-prodvd: I/O error. 
>write_g1: scsi sendcmd: retryable error
>CDB:  2A 00 00 0F A9 A4 00 00 1F 00
>status: 0x2 (CHECK CONDITION)
>Sense Bytes: F1 00 03 00 0F A0 CB 12 00 00 00 00 0C 08 00 00 00 00 00 00 8C 03 00 00 
>00 00 DF FF 00 00 00 00
>Sense Key: 0x3 Medium Error, deferred error, Segment 0
>Sense Code: 0x0C Qual 0x08 (write error - recovery failed) Fru 0x0
>Sense flags: Blk 1024203 (valid) 
>resid: 63488
>cmd finished after 0.027s timeout 100s
>Sense Bytes: 70 00 00 00 00 00 00 12 00 00 00 00 00 00 00 00 00 00

The message is obvious: The drive has problems with the media quality.

The Sony is known to be very picky about medium quality....
You did neither mention the media manufacturer nor include a cdrecord -atip
outout.....

Buy better media.

Jörg

 EMail:[EMAIL PROTECTED] (home) Jörg Schilling D-13353 Berlin
       [EMAIL PROTECTED]               (uni)  If you don't have iso-8859-1
       [EMAIL PROTECTED]           (work) chars I am J"org Schilling
 URL:  http://www.fokus.fhg.de/usr/schilling   ftp://ftp.berlios.de/pub/schily


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Reply via email to