Here is the additional output you requested, the CD-RW is a RICOH, printed with blue silkscreen ink, reading (from the top):
CD-RW COMPACT DISC REWRITABLE RICOH RICOH COMPANY, LTD. MADE IN JAPAN TYPE 74 650MB I have an even dozen of them, bought at the same time as a 100 count stack of standard CD-R media from the RICOH online store. The serial numbers all vary in the last five digits, but the start series is: R2197302xxxxx. The same behaviour occurs on every CD-RW I have (currently only RICOH). I am searching for another brand to try that and will post once I have procured and tested. $ cdrecord dev=1,1,0 -speed=4 -blank fast -vv Cdrecord 2.01a15 (i686-pc-cygwin) Copyright (C) 1995-2003 Jörg Schilling TOC Type: 1 = CD-ROM scsidev: '1,1,0' scsibus: 1 target: 1 lun: 0 Using libscg version 'schily-0.7' Using libscg transport code version 'schily-scsi-wnt.c-1.29' atapi: -1 Device type : Removable CD-ROM Version : 0 Response Format: 2 Capabilities : Vendor_info : '_NEC ' Identifikation : 'CD-RW NR-9300A ' Revision : '105B' Device seems to be: Generic mmc CD-RW. Current: 0x000A Profile: 0x000A (current) Profile: 0x0009 Profile: 0x0008 (current) Drive current speed: 4 Drive default speed: 4 Drive max speed : 4 Selected speed : 4 Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC-3 SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO SAO/R96R RAW/R96R Drive buf size : 1226752 = 1198 KB 01 00 00 01 00 00 00 00 01 AA 01 01 00 00 00 00 Track 1 start -150 01 00 A0 00 00 00 00 01 00 00 00 00 01 00 A1 00 00 00 00 00 00 00 00 00 01 00 A2 00 00 00 00 00 00 00 00 00 Current Secsize: 2048 ATIP info from disk: Indicated writing power: 5 Reference speed: 2 Is not unrestricted Is erasable ATIP start of lead in: -11625 (97:27/00) ATIP start of lead out: 333750 (74:12/00) 1T speed low: 2 1T speed high: 2 power mult factor: 5 6 recommended erase/write power: 3 A1 values: 11 5C B0 Disk type: Phase change Manuf. index: 0 Manufacturer: Illegal Manufacturer code cdrecord: Write speed 2 of medium not sufficient for this writer. cdrecord: You may have used an ultra low speed medium on a high speed writer. $ cdrecord dev=1,1,0 -speed=4 -blank fa st -vv Cdrecord 2.00.3 (i686-pc-cygwin) Copyright (C) 1995-2002 Jörg Schilling TOC Type: 1 = CD-ROM scsidev: '1,1,0' scsibus: 1 target: 1 lun: 0 Using libscg version 'schily-0.7' Using libscg transport code version 'schily-scsi-wnt.c-1.29' atapi: -1 Device type : Removable CD-ROM Version : 0 Response Format: 2 Capabilities : Vendor_info : '_NEC ' Identifikation : 'CD-RW NR-9300A ' Revision : '105B' Device seems to be: Generic mmc CD-RW. Drive current speed: 4 Drive default speed: 4 Drive max speed : 4 Selected speed : 4 Using generic SCSI-3/mmc CD-R driver (mmc_cdr). Driver flags : MMC-3 SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO SAO/R96R RAW/R96R Drive buf size : 1226752 = 1198 KB 01 00 00 01 00 00 00 00 01 AA 01 01 00 00 00 00 Track 1 start -150 01 00 A0 00 00 00 00 01 00 00 00 00 01 00 A1 00 00 00 00 00 00 00 00 00 01 00 A2 00 00 00 00 00 00 00 00 00 Current Secsize: 2048 ATIP info from disk: Indicated writing power: 5 Reference speed: 2 Is not unrestricted Is erasable ATIP start of lead in: -11625 (97:27/00) ATIP start of lead out: 333750 (74:12/00) 1T speed low: 2 1T speed high: 2 power mult factor: 5 6 recommended erase/write power: 3 A1 values: 11 5C B0 Disk type: Phase change Manuf. index: 0 Manufacturer: Illegal Manufacturer code cdrecord: Write speed 2 of medium not sufficient for this writer. cdrecord: You may have used an ultra low speed medium on a high speed writer. $ cdrecord dev=1,1,0 -speed=4 -blank fast -vv Cdrecord 1.11a12 (i586-pc-cygwin) Copyright (C) 1995-2001 Jörg Schilling TOC Type: 1 = CD-ROM scsidev: '1,1,0' scsibus: 1 target: 1 lun: 0 Using libscg version 'schily-0.5' Using libscg transport code version 'schily-scsi-wnt.c-1.27' atapi: -1 Device type : Removable CD-ROM Version : 0 Response Format: 2 Capabilities : Vendor_info : '_NEC ' Identifikation : 'CD-RW NR-9300A ' Revision : '105B' Device seems to be: Generic mmc CD-RW. Using generic SCSI-3/mmc CD-R driver (mmc_cdr). Driver flags : SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO SAO/R96R RAW/R96R Drive buf size : 1226752 = 1198 KB 01 00 00 01 00 00 00 00 01 AA 01 01 00 00 00 00 Track 1 start -150 01 00 A0 00 00 00 00 00 00 00 00 00 01 00 A1 00 00 00 00 00 00 00 00 00 01 00 A2 00 00 00 00 00 00 00 00 00 Current Secsize: 2048 ATIP info from disk: Indicated writing power: 5 Reference speed: 2 Is not unrestricted Is erasable ATIP start of lead in: -11625 (97:27/00) ATIP start of lead out: 333750 (74:12/00) speed low: 2 speed high: 2 power mult factor: 5 6 recommended erase/write power: 3 Disk type: Phase change Manuf. index: 0 Manufacturer: Illegal Manufacturer code Blocks total: 1166730 Blocks current: 1166730 Blocks remaining: 1166880 Starting to write CD/DVD at speed 4 in write mode for single session. Last chance to quit, starting real write in 0 seconds. Operation starts. Performing OPC... Blanking PMA, TOC, pregap Blanking time: 44.813s -- Ed Vázquez ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The best way to predict your future is to create it. On Thu, 12 Jun 2003, Joerg Schilling wrote: > >From: Ed Vazquez <[EMAIL PROTECTED]> > > >Problem: > >The old (1.11a12) version successfully creates CD-RWs that are > >readable, bootable, etc. by all OS's here, the new version (2.0x) does > >not. > > First, it would help a lot to save my time if you had decribed your problem..... > > >Media: > >Ricoh CD-RW Type 74 650Mb > > >On running a "cdrecord dev=3D1,1,0 -blank fast -v" I get: > > >Cdrecord 2.01a15 (i686-pc-cygwin) Copyright (C) 1995-2003 J=F6rg > >Schilling > >TOC Type: 1 =3D CD-ROM > >scsidev: '1,1,0' > >scsibus: 1 target: 1 lun: 0 > >Using libscg version 'schily-0.7' > >atapi: -1 > >Device type : Removable CD-ROM > >Version : 0 > >Response Format: 2 > >Capabilities : > >Vendor_info : '_NEC ' > >Identifikation : 'CD-RW NR-9300A ' > >Revision : '105B' > >Device seems to be: Generic mmc CD-RW. > >Current: 0x000A > >Profile: 0x000A (current) > >Profile: 0x0009 > >Profile: 0x0008 (current) > >Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). > >Driver flags : MMC-3 SWABAUDIO BURNFREE > >Supported modes: TAO PACKET SAO SAO/R96R RAW/R96R > >Drive buf size : 1226752 =3D 1198 KB > >Current Secsize: 2048 > >ATIP info from disk: > > Indicated writing power: 5 > > Reference speed: 2 > > Is not unrestricted > > Is erasable > > ATIP start of lead in: -11625 (97:27/00) > > ATIP start of lead out: 333750 (74:12/00) > > 1T speed low: 2 1T speed high: 2 > > power mult factor: 5 6 > > recommended erase/write power: 3 > > A1 values: 11 5C B0 > >Disk type: Phase change > >Manuf. index: 0 > >Manufacturer: Illegal Manufacturer code > >cdrecord: Write speed 2 of medium not sufficient for this writer. > >cdrecord: You may have used an ultra low speed medium on a high speed > >writer. > > > I cannot believe that this should be a ricoh media. > > You need to repeat this with -vv > > Jörg > > EMail:[EMAIL PROTECTED] (home) Jörg Schilling D-13353 Berlin > [EMAIL PROTECTED] (uni) If you don't have iso-8859-1 > [EMAIL PROTECTED] (work) chars I am J"org Schilling > URL: http://www.fokus.fraunhofer.de/usr/schilling ftp://ftp.berlios.de/pub/schily > -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
