below are my results for prodvd
# cdrecord-prodvd --version
Cdrecord-ProDVD-Clone 2.0.1 (i586-pc-linux-gnu) Copyright (C) 1995-2002 J?rg Schilling
Unlocked features:
Limited features:
# cdrecord-prodvd dev=0,0,0 -v -multi home_stx.tar works great!
# cdrecord-prodvd dev=0,0,0 -toc first: 1 last 1 track: 1 lba: 0 ( 0) 00:02:00 adr: 1 control: 4 mode: -1 track:lout lba: 7840 ( 31360) 01:46:40 adr: 1 control: 4 mode: -1
# cdrecord-prodvd dev=0,0,0 -multi etc_stx.tar
Cdrecord-ProDVD-Clone 2.0.1 (i586-pc-linux-gnu) Copyright (C) 1995-2002 J?rg Schilling
Unlocked features:
Limited features:
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.1.24
Using libscg version 'schily-0.7'
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'PIONEER '
Identifikation : 'DVD-RW DVR-105 '
Revision : '1.21'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
cdrecord-prodvd: This version of cdrecord limits DVD-R/DVD-RW support to -dummy or 1 GB real.
cdrecord-prodvd: If you need full DVD-R/DVD-RW support, ask the Author for cdrecord-ProDVD.
Using generic SCSI-3/mmc-2 DVD-R/DVD-RW driver (mmc_dvd).
Driver flags : DVD SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
cdrecord-prodvd: Drive needs to reload the media to return to proper status.
WARNING: Phys disk size 7840 differs from rzone size 0! Prerecorded disk?
WARNING: Phys start: 196608 Phys end 204447
Starting to write CD/DVD at speed 2 in real TAO mode for multi session.
Last chance to quit, starting real write 0 seconds. Operation starts.
cdrecord-prodvd: Input/output error. reserve_rzone: scsi sendcmd: no error
CDB: 53 00 00 00 00 00 00 10 8B 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0E 00 00 00 00 30 05 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x30 Qual 0x05 (cannot write medium - incompatible format) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.005s timeout 100s
-- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]