>From: Dan <[EMAIL PROTECTED]>
> I'm having problems burning cds with my TDK 440n DVD+/-rw drive, >burning dvds with growisofs works fine. It's not the drive's hardware, >as I've tested burning cds in windows on another box and it's working >ok. Burning cds with cdrecord did work in the past, but I've since >updated cdrecord, updated my kernel from 2.4.x to 2.6.x, changed from >ide-scsi to atapi, and updated the drives firmware before i noticed cd >burning wasn't working any more, so it's hard to track down what the >problem is, below is the output of dmesg when burning followed by >cdrecord's output. Please CC me any replies as I'm not subscribed to >the list, thanks everyone! >dmesg: >hdc: status error: error=0x04Aborted Command >hdc: drive not ready for command >hdc: ATAPI reset complete >cdrecord: >cdrecord: No write mode specified. >cdrecord: Asuming -tao mode. >cdrecord: Future versions of cdrecord may have different drive >de pendent >defaults. >cdrecord: Continuing in 5 seconds... >Cdrecord-Clone 2.01a32 (i686-pc-linux-gnu) Copyright (C) >1995-200 4 Jörg >Schilling >scsidev: 'ATAPI:0,0,0' >devname: 'ATAPI' >scsibus: 0 target: 0 lun: 0 >Warning: Using ATA Packet interface. >Warning: The related Linux kernel interface code seems to be >unma intained. >Warning: There is absolutely NO DMA, operations thus are slow. >Using libscg version 'schily-0.8'. >Device type : Removable CD-ROM >Version : 0 >Response Format: 2 >Capabilities : >Vendor_info : 'TDK ' >Identifikation : 'DVDRW0404N ' >Revision : '1.0A' >Device seems to be: Generic mmc2 DVD-R/DVD-RW. >cdrecord: This version of cdrecord does not include >DVD-R/DVD-RW >support code. >cdrecord: If you need DVD-R/DVD-RW support, ask the Author for >cd record-ProDVD. >cdrecord: Free test versions and free keys for personal use are >a t >ftp://ftp.berlios.de/pub/cdrecord/ProDVD/ >Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). >Driver flags : MMC-3 SWABAUDIO BURNFREE >Supported modes: TAO PACKET SAO SAO/R96R RAW/R96R >Starting to write CD/DVD at speed 4 in real TAO mode for single >s ession. >Last chance to quit, starting real write 0 seconds. >Operation starts. >Turning BURN-Free off >cdrecord: faio_wait_on_buffer for writer timed out. >cdrecord: Input/output error. write_g1: scsi sendcmd: no error >CDB: 2A 00 00 00 00 00 00 00 1F 00 >status: 0x0 (GOOD STATUS) >cmd finished after 400.213s timeout 40s >write track data: error after 0 bytes >cdrecord: A write error occured. >cdrecord: Please properly read the error message above. >cdrecord: Input/output error. test unit ready: scsi sendcmd: >retr yable error >CDB: 00 00 00 00 00 00 >status: 0xa (Reserved) >Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 04 01 00 80 26 >6 6 >Sense Key: 0x2 Not Ready, Segment 0 >Sense Code: 0x04 Qual 0x01 (logical unit is in process of >becomin g ready) >Fru 0x0 >Sense flags: Blk 0 (not valid) operation 14% done >cmd finished after 0.006s timeout 40s Looks like you have another unfriendly application running that tries simultanous access to the drive :-( Jörg -- EMail:[EMAIL PROTECTED] (home) Jörg Schilling D-13353 Berlin [EMAIL PROTECTED] (uni) If you don't have iso-8859-1 [EMAIL PROTECTED] (work) chars I am J"org Schilling URL: http://www.fokus.fraunhofer.de/usr/schilling ftp://ftp.berlios.de/pub/schily -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
