V po, 19. 01. 2004 v 16:02, Joerg Schilling píše: > >OS: Solaris 9, x386 > >cdrecord version: cd-record-prodvd-2.01a12-i386-pc-solaris2.9 > >DVD Model: Sony DRU-510A > > >When I try to burn a DVD (using DVD-R media this is the results I get ... > > >cdrecord -V dev=1,0,0 speed=2 driveropts=burnfree /var/system/win32ahc.iso > >Cdrecord-ProDVD-Clone 2.01a12 (i386-pc-solaris2.9) Copyright (C) 1995-2003 > >Jörg > >Schilling > >Unlocked features: ProDVD Clone > >Limited features: > >This copy of cdrecord is licensed for: > >private/research/educational_non-commerci > >al_use > >scsidev: '1,0,0' > >scsibus: 1 target: 0 lun: 0 > >Warning: Using USCSI interface. > >Using libscg version 'schily-0.7' > >Device type : Removable CD-ROM > >Version : 0 > >Response Format: 2 > >Capabilities : > >Vendor_info : 'SONY ' > >Identifikation : 'DVD RW DRU-510A ' > >Revision : '1.0a' > >Device seems to be: Generic mmc2 DVD-R/DVD-RW. > >Using generic SCSI-3/mmc-2 DVD-R/DVD-RW driver (mmc_dvd). > >Driver flags : DVD MMC-3 SWABAUDIO BURNFREE > >Supported modes: TAO PACKET SAO SAO/R96R RAW/R96R > >Starting to write CD/DVD at speed 2 in real TAO mode for single session. > >Last chance to quit, starting real write 0 seconds. Operation starts. > >cdrecord: I/O error. write_g1: scsi sendcmd: no error > >CDB: 2A 00 00 00 08 B8 00 00 1F 00 > >status: 0x2 (CHECK CONDITION) > >Sense Bytes: 70 00 05 00 00 00 00 12 00 00 00 00 21 02 00 C0 00 02 > >Sense Key: 0x5 Illegal Request, Segment 0 > >Sense Code: 0x21 Qual 0x02 (invalid address for write) Fru 0x0 > >Sense flags: Blk 0 (not valid) error refers to command part, bit ptr 0 (not > >vali > >d) field ptr 2 > >resid: 63488 > >cmd finished after 0.007s timeout 100s > >write track data: error after 4571136 bytes > >cdrecord: The current problem looks like a buffer underrun. > >cdrecord: It looks like 'driveropts=burnfree' does not work for this drive. > >cdrecord: Please report. > >cdrecord: Make sure that you are root, enable DMA and check your HW/OS set > >up. > > Maybe your drive does not support burnfree with DVDs. > > Note that some drives return this type of error condition when the drive > does not like the medium.
Also try -dao mode. I have the same unit (under different OS) and I was
only able to write DVD-R in -dao mode.
--
Pav Lucistnik <[EMAIL PROTECTED]>
<[EMAIL PROTECTED]>
> With a 10 MHz 386 the downloading speed would most likely drop to a crawl
> or stop with the decoding process etc.
I think most 10MHz 386 users are quite accustomed to things dropping
to a crawl.
signature.asc
Description: Toto je =?iso-8859-2?Q?digit=E1ln=EC?= =?ISO-8859-1?Q?_podepsan=E1?= =?iso-8859-2?Q?_=E8=E1st?= =?ISO-8859-1?Q?_zpr=E1vy?=
