Hello I am ryting to record a CD-R using my LG 420B drive. The LG can blank the media without a problem but when I try to burn an image this is what I got:
Device type : Removable CD-ROM Version : 2 Response Format: 2 Capabilities : Vendor_info : 'HL-DT-ST' Identifikation : 'DVDRAM GSA-4120B' Revision : 'A112' Device seems to be: Generic mmc2 DVD-R/DVD-RW. Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC-3 SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R Starting to write CD/DVD at speed 10.0 in real TAO mode for single session. Last chance to quit, starting real write 0 seconds. Operation starts. trackno=0 cdrecord: Input/output error. write_g1: scsi sendcmd: no error CDB: 2A 00 00 00 03 64 00 00 1F 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 00 00 00 00 10 2A 30 06 90 21 02 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x21 Qual 0x02 (invalid address for write) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.002s timeout 40s write track data: error after 1777664 bytes cdrecord: The current problem looks like a buffer underrun. cdrecord: It looks like 'driveropts=burnfree' does not work for this drive. cdrecord: Please report. cdrecord: Make sure that you are root, enable DMA and check your HW/OS set up. cdrecord: Caught interrupt. cdrecord: Caught interrupt. cdrecord: Second interrupt. Doing hard abort. Why doesn´t burnfree works for this drive since cdrecord says Driver flags : MMC-3 SWABAUDIO BURNFREE ? Any suggestions Many thanks Ed -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]