Vasileios Gkanis wrote:
Is DMA enabled on the burner? hdparm /dev/hd...
Yes DMA is enabled
If you have the HD and the burner on the same IDE cable they *may* be
interfering with each other. If you can try putting the burner on
another cable it would give you a data point, and might help.
I assume that your burner really is faster than the speed you are
seeing, and you're using fast media.
hdparm /dev/hda
/dev/hda:
multcount = 16 (on)
IO_support = 1 (32-bit)
unmaskirq = 1 (on)
using_dma = 1 (on)
keepsettings = 1 (on)
readonly = 0 (off)
readahead = 256 (on)
geometry = 16383/255/63, sectors = 80026361856, start = 0
hdparm /dev/hdb
/dev/hdb:
IO_support = 1 (32-bit)
unmaskirq = 1 (on)
using_dma = 1 (on)
keepsettings = 1 (on)
readonly = 0 (off)
readahead = 256 (on)
HDIO_GETGEO failed: Invalid argument
--
bill davidsen <[EMAIL PROTECTED]>
CTO TMR Associates, Inc
Doing interesting things with small computers since 1979
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
