Hi guys, I have an issue trying to burn data into a DVD+RW disc in an
IDE BENQ DVD+R/+RW unit connected as master of second ide bus (hdc).
All actions are performed as root
Here are the details:
RedHat 9.0 with 2.4.20-8 stock kernel
cdrecord-2.0-6.i386.rpm
dvd+rw-tools-5.17.4.8.6-2.i386.rpm
**doing SCSI emulation by loading ide-scsi module **
# lsmod
Module Size Used by Not tainted
autofs 13268 0 (autoclean) (unused)
sis900 16812 1
sg 36524 0 (autoclean)
ide-scsi 12208 0 (autoclean)
sr_mod 18136 0 (autoclean)
cdrom 33728 0 (autoclean) [sr_mod]
scsi_mod 107160 3 (autoclean) [sg ide-scsi sr_mod]
ext3 70784 2
jbd 51892 2 [ext3]
# DOING BURN AS SCSI DEVICE
# cdrecord dev=0,0,0 /root/images/mindi/mindi.iso
Cdrecord 2.0 (i686-pc-linux-gnu) Copyright (C) 1995-2002 Jörg Schilling
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.1.24
Using libscg version 'schily-0.7'
cdrecord: Warning: using inofficial libscg transport code version
(schily - Red
Hat-scsi-linux-sg.c-1.75-RH '@(#)scsi-linux-sg.c 1.75 02/10/21
Copyright 1997 J.
Schilling').
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'BENQ '
Identifikation : 'DVD DD DW1620 '
Revision : 'B7H9'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
cdrecord: Found DVD media but DVD-R/DVD-RW support code is missing.
cdrecord: This version of cdrecord does not include DVD-R/DVD-RW support code.
cdrecord: If you need DVD-R/DVD-RW support, ask the Author for cdrecord-ProDVD.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96R RAW/R16 RAW/R96R
cdrecord: Drive needs to reload the media to return to proper status.
Starting to write CD/DVD at speed 31 in real TAO mode for single session.
Last chance to quit, starting real write 0 seconds. Operation starts.
Turning BURN-Free off
cdrecord: Input/output error. read track info: scsi sendcmd: no error
CDB: 52 01 00 00 00 FF 00 00 1C 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 12 00 00 00 00 24 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.002s timeout 240s
#
# END AS SCSI DEVICE
# Scanning the bus as IDE reveals nothing
# cdrecord dev=ATAPI -scanbus
Cdrecord 2.0 (i686-pc-linux-gnu) Copyright (C) 1995-2002 Jörg Schilling
scsidev: 'ATAPI'
devname: 'ATAPI'
scsibus: -2 target: -2 lun: -2
Warning: Using ATA Packet interface.
Warning: The related libscg interface code is in pre alpha.
Warning: There may be fatal problems.
cdrecord: No such device or address. Cannot open SCSI driver.
cdrecord: For possible targets try 'cdrecord -scanbus'. Make sure you are root.
cdrecord: For possible transport specifiers try 'cdrecord dev=h
--
Thanks for your suggestions and pointers to make this DVDRW work.
-------------------------------------------
Erick Perez
Linux User 376588
http://counter.li.org/ (Get counted!!!)
Panama, Republic of Panama