CJ Kucera <[EMAIL PROTECTED]> wrote:
> Hello - I'm having some issues burning a dual-layer DVD. Yesterday I
> burnt my last DVD+R DL disc (Memorex 2.4x) so I got another pack of
> essentially the same, though this was rated at 8x. It looks like that's
> the one difference between the two packs of discs. Now, whenever I try
> to burn to these new discs, I get the following, apparently right around
> the layer split:
>
> > 50.08% done, estimate finish Thu Jan 10 12:28:35 2008
> > :-[ [EMAIL PROTECTED] failed with SK=3h/ASC=73h/ACQ=03h]: Input/output error
> > :-( write failed: Input/output error
>
> I know that this corresponds to "POWER CALIBRATION AREA ERROR" but that
I still don't understand why there is no readable output from growisofs.
> The new, blank discs look like this with dvd+rw-mediainfo:
>
> > # dvd+rw-mediainfo /dev/dvd
> > INQUIRY: [Optiarc ][DVD RW AD-7170A ][1.02]
> > GET [CURRENT] CONFIGURATION:
> > Mounted Media: 2Bh, DVD+R Double Layer
> > Media ID: RITEK/S04
Try to avoid this manufacturer at least for dual layer. I got many reports
about drives that will not write to the 2nd layer.
Jörg
--
EMail:[EMAIL PROTECTED] (home) Jörg Schilling D-13353 Berlin
[EMAIL PROTECTED] (uni)
[EMAIL PROTECTED] (work) Blog: http://schily.blogspot.com/
URL: http://cdrecord.berlios.de/old/private/ ftp://ftp.berlios.de/pub/schily
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
