Joerg Schilling wrote: > Are you talking about DVD+ or DVD-? I was talking about my DVD+R/DL discs.
> It seems that you confused the cdrecord man page: > > - Layer jump is not available for DVD+ > - Layer jump is not yet implemented for DVD- as the drive I owned > did not like it when I tried to implement it. Here's the relevant bits from my cdrecord manpage on my current version (Cdrecord-ProDVD-ProBD-Clone 2.01.01a38) - I suppose I should have mentioned the version to begin with: > layerbreak > Switch a drive with DVD-R/DL medium into layer jump > recording recording mode and use automatic layer break > position set up. > > layerbreak=value > Set up a manual layer break value for DVD-R/DL and > DVD+R/DL. To me, that implies that layerbreak=value would work for a DVD+R/DL, and plain "layerbreak" would only work for DVD-R/DL. I had just been asking if that was actually the case, or just sort of a typo. > Please explain your problem! > Cdrecord does the right thing with DVD+R without the need for a manual > layer break. A manual layer break is only needed for DVD-Video. I thought that I had. DVD+R/DL discs burned without "layerbreak=value" on my box result in discs which are unreadable past the layer break (at least, I assume that's where it fails, since it's at just about half the size of the disc). Once I threw in a manual layerbreak, the discs that I burnt worked properly. I didn't mention this in the original email, but I haven't yet run any tests on a different batch of discs, to see if it was just the media requiring that flag for me. -CJ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]