Hello, I have tried with mkisofs $OPTS -V $1 $2|cdrecord driveropts=layerbreak=2086912 $COMCD tsize="$SIZE"s -
Which I am not sure of the syntax... I don't fully understand cdrecord man page. Unfortunately : Track 01: 4041 of 8124 MB written (fifo 100%) [buf 99%] 8.4x. 61.66% done, estimate finish Thu May 15 22:44:57 2008 Track 01: 4051 of 8124 MB written (fifo 99%) [buf 99%] 8.4x. 61.78% done, estimate finish Thu May 15 22:44:56 2008 Track 01: 4061 of 8124 MB written (fifo 99%) [buf 99%] 8.3x. 61.90% done, estimate finish Thu May 15 22:44:55 2008 Track 01: 4070 of 8124 MB written (fifo 99%) [buf 99%] 8.5x. 62.02% done, estimate finish Thu May 15 22:44:55 2008 Track 01: 4075 of 8124 MB written (fifo 99%) [buf 99%] 8.2x.cdrecord: faio_wait_on_buffer for writer timed out. cdrecord: Input/output error. write_g1: scsi sendcmd: no error CDB: 2A 00 00 1F D7 E9 00 00 1F 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 72 0B 00 00 00 00 00 0E 09 0C 00 00 00 03 00 00 Sense Key: 0x0 No Additional Sense, Segment 11 Sense Code: 0x00 Qual 0x03 (setmark detected) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 255.841s timeout 100s cdrecord: No such device or address. Cannot send SCSI cmd via ioctl. write track data: error after 4273948672 bytes cdrecord: A write error occured. cdrecord: Please properly read the error message above. cdrecord: No such device. prevent/allow medium removal: scsi sendcmd: no error CDB: 1E 00 00 00 00 00 status: 0x0 (GOOD STATUS) cmd finished after 0.000s timeout 100s cdrecord: No such device. test unit ready: scsi sendcmd: no error CDB: 00 00 00 00 00 00 status: 0x0 (GOOD STATUS) cmd finished after 0.000s timeout 100s Writing time: 813.160s Average write speed 7.6x. Min drive buffer fill was 90% Fixating... cdrecord: No such device. flush cache: scsi sendcmd: no error CDB: 35 02 00 00 00 00 00 00 00 00 status: 0x0 (GOOD STATUS) cmd finished after 0.000s timeout 1000s cdrecord: No such device. flush cache: scsi sendcmd: no error CDB: 35 02 00 00 00 00 00 00 00 00 status: 0x0 (GOOD STATUS) cmd finished after 0.000s timeout 1000s cmd finished after 0.000s timeout 1000s Trouble flushing the cache cdrecord: Cannot fixate disk. Fixating time: 0.000s cdrecord: No such device. prevent/allow medium removal: scsi sendcmd: no error CDB: 1E 00 00 00 00 00 status: 0x0 (GOOD STATUS) cmd finished after 0.000s timeout 100s cdrecord: fifo had 83313 puts and 67320 gets. cdrecord: fifo was 0 times empty and 23469 times full, min fill was 99%. Hard... -- Grégoire FAVRE http://gregoire.favre.googlepages.com http://www.gnupg.org http://picasaweb.google.com/Gregoire.Favre -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]