Hello, I would like to burn from my client to my server. I used to be able to when the server was kernel 2.4, but it's changed recently to 2.6. The client refers to the burner as /dev/hda, but the server refers to it as /dev/hdb. There is clearly something wonky going on here. The story below tells the tale. Any clues?
Regards Fog_Watch. CLIENT 2.6.22-gentoo-r8 cdrtools-2.01.01_alpha34 At the client machine I $ cdrecord -dev=REMOTE:[EMAIL PROTECTED] -scanbus Cdrecord-ProDVD-ProBD-Clone 2.01.01a34 (i686-pc-linux-gnu) Copyright (C) 1995-2007 J��rg Schilling scsidev: 'REMOTE:[EMAIL PROTECTED]' devname: 'REMOTE:[EMAIL PROTECTED]' scsibus: -1 target: -1 lun: -1 Warning: Using remote SCSI interface. cdrecord: Permission denied. Cannot open '/dev/hda'. Cannot open or use SCSI driver. cdrecord: For possible targets try 'cdrecord -scanbus'. Make sure you are root. cdrecord: For possible transport specifiers try 'cdrecord dev=help'. SERVER 2.6.24-gentoo-r8 cdrtools-2.01.01_alpha34 # dmesg | grep CD hdb: SONY CD-RW CRX175E, ATAPI CD/DVD-ROM drive scsi 0:0:0:0: CD-ROM SONY CD-RW CRX175E 1.0j PQ: 0 ANSI: 0 Uniform CD-ROM driver Revision: 3.20 sr 0:0:0:0: Attached scsi CD-ROM sr0 # cat /tmp/RSCSI rscsid: user id 1000, name rscsi rmt: peername 192.168.1.1 rmt: peername server rscsid: O rscsid:>E 13 (Permission denied) [Cannot open '/dev/hda'] Two relevant lines from /var/log/syslog: Jun 12 12:38:41 server xinetd[4779]: START: shell pid=8011 from=192.168.1.1 Jun 12 12:38:41 server xinetd[4779]: EXIT: shell status=0 pid=8011 duration=0(sec) -- Lose wait. Get Gentoo. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]