On Wed, Jul 28, 2010 at 03:47:30PM +0200, Joerg Schilling wrote: Hello,
thank for your answer. I just followed what cdrecord ask me to do : report the error. Another media of the same kind gives me : cdrecord -minfo Cdrecord-ProDVD-ProBD-Clone 3.00 (x86_64-unknown-linux-gnu) Copyright (C) 1995-2010 Jörg Schilling Linux sg driver version: 3.5.34 Using libscg version 'schily-0.9'. No target specified, trying to find one... Using dev=5,0,0. Device type : Removable CD-ROM Version : 5 Response Format: 2 Capabilities : Vendor_info : 'TSSTcorp' Identifikation : 'CDDVDW SH-S223F ' Revision : 'SB03' Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM. Using generic SCSI-3/mmc-3 DVD+R driver (mmc_dvdplusr). Driver flags : NO-CD DVD MMC-3 SWABAUDIO BURNFREE Supported modes: PACKET SAO LAYER_JUMP cdrecord: Warning: Cannot read drive buffer. cdrecord: Warning: The DMA speed test has been skipped. Mounted media class: DVD Mounted media type: DVD+R/DL Disk Is not erasable data type: standard disk status: empty session status: empty BG format status: none first track: 1 number of sessions: 1 first track in last sess: 1 last track in last sess: 1 Disk Is unrestricted Disk type: DVD, HD-DVD or BD Track Sess Type Start Addr End Addr Size ============================================== 1 1 Blank 0 4173823 4173824 Next writable address: 0 Remaining writable size: 4173824 Or dvd+rw-mediainfo /dev/sr0 INQUIRY: [TSSTcorp][CDDVDW SH-S223F ][SB03] GET [CURRENT] CONFIGURATION: Mounted Media: 2Bh, DVD+R Double Layer Current Write Speed: 8.0x1385=11080KB/s Write Speed #0: 8.0x1385=11080KB/s Write Speed #1: 6.0x1385=8310KB/s Write Speed #2: 4.0x1385=5540KB/s GET [CURRENT] PERFORMANCE: Write Performance: 8.0x1385=11080KB/s...@[0 -> 4173824] Speed Descriptor#0: 00/4173823 r...@12.0x1385=16620kb/s w...@8.0x1385=11080kb/s Speed Descriptor#1: 00/4173823 r...@12.0x1385=16620kb/s w...@6.0x1385=8310kb/s Speed Descriptor#2: 00/4173823 r...@12.0x1385=16620kb/s w...@4.0x1385=5540kb/s READ DVD STRUCTURE[#0h]: Media Book Type: 00h, DVD-ROM book [revision 0] Media ID: RICOHJPN/D01 Legacy lead-out at: 2086912*2KB=4273995776 DVD+R DOUBLE LAYER BOUNDARY INFORMATION: L0 Data Zone Capacity: 2086912*2KB, can still be set READ DISC INFORMATION: Disc status: blank Number of Sessions: 1 State of Last Session: empty "Next" Track: 1 Number of Tracks: 1 READ TRACK INFORMATION[#1]: Track State: blank Track Start Address: 0*2KB Next Writable Address: 0*2KB Free Blocks: 4173824*2KB Track Size: 4173824*2KB ROM Compatibility LBA: 265696 READ CAPACITY: 0*2048=0 So my burner is a Samsung SH-S223F and the medias are from Prodye. I don't have hald running here and two medias died in the process, I tried the third one with growisofs which burns it fine. Sure my media are cheaps one and it don't mean anthing. Again I just repported it because of the cdrecord message. If my repport is of no use just forget about it :-) Gave a nice day, > Without any information on HW and media, I asume that either your media is > cheap junk or that hald or other unfriendly programs did interrupt the write > process. -- Grégoire Favre, Chemin de Mallieu 15, 1009 Pully, +41 21 550 61 93 prof -> Gymnase de Chamblandes, Avenue des Désertes 29, 1009 Pully sip -> 310...@sip.freesip.ch / gsm -> +41 78 765 65 00 http://www.gycham.vd.ch/~greg / netvoip.ch : +41 21 544 77 44 -- To UNSUBSCRIBE, email to cdwrite-requ...@other.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@other.debian.org Archive: http://lists.debian.org/20100728220442.gc3...@gmail.com