Julio desde ya muchas gracias por la respuesta. Disculpa la demora en responder mis findes me retraigo a mi aldea y alla la interne no llega jeje. Hice lo que vos me pasaste y continue teniendo el mismo problema. Lo solucione instalando los drivers foo2zjs (http://foo2zjs.rkkda.com/). Ya esta funcionando por suerte.
Saludos 2012/2/5 Julio Martinez <hul...@yahoo.com> > Hola Sergio, > Si no tienes instalado aún, estos son los paqutes que deberías instalar > para que una HP te corra en CentOS > hplip > hplip-common > hplip-gui > hplip-libs > > Si quieres que tu Ubuntu pueda utlizarlo también tienes que instalar estos > paquetes. > > Saludos > Julio > > --- On Thu, 2/2/12, Sergio Rebich <s...@rcom.com.ar> wrote: > > From: Sergio Rebich <s...@rcom.com.ar> > Subject: [CentOS-es] Problemas Impresora HP > To: centos-es@centos.org > Date: Thursday, 2 February, 2012, 18:21 > > Buenas tardes gente, esta es mi primer consulta, pido disculpa sino cumplo > con algun requisito. Tengo una consulta para hacer, estoy intentando > agregar una impresora HP LaserJet P1505 en un Servidor Centos 5.7 para > compartirla con el resto de la red, la misma esta instalada e imprimiendo > localmente en un puesto de trabajo con Ubuntu. El error que da es > *"/usr/lib/cups/filter/foomatic-rip-hplip > failed". *Alguno tubo el mismo problema? > Aclaro que al instalar el python-dbus me dice: que ya esta actualizado y en > su ultima version. > > Aca les paso los resultados del hp-check. Gracias por todo y disculpa por > las molestias, > > > ------------------------------------------------------------------------------------------------------------------------------------------------------------- > warning: python-dbus not installed. > > HP Linux Imaging and Printing System (ver. 3.11.12) > Dependency/Version Check Utility ver. 14.3 > > Copyright (c) 2011-14 Hewlett-Packard Development Company, LP > This software comes with ABSOLUTELY NO WARRANTY. > This is free software, and you are welcome to distribute it > under certain conditions. See COPYING file for more details. > > Note: hp-check can be run in three modes: > 1. Compile-time check mode (-c or --compile): Use this mode before > compiling the HPLIP supplied tarball (.tar.gz or .run) to determine if the > proper > dependencies are installed to successfully compile > HPLIP. > > 2. Run-time check mode (-r or --run): Use this mode to determine if a > distro supplied package (.deb, .rpm, etc) or an already built HPLIP > supplied tarball > has the proper dependencies installed to successfully > run. > > 3. Both compile- and run-time check mode (-b or --both) (Default): This > mode will check both of the above cases (both compile- and run-time > dependencies). > > Saving output in log file: hp-check.log > > Initializing. Please wait... > -debug1: client_input_channel_open: ctype x11 rchan 3 win 65536 max 16384 > debug1: client_request_x11: request from 192.168.84.200 54402 > debug1: channel 1: new [x11] > debug1: confirm x11 > |debug1: client_input_channel_open: ctype x11 rchan 4 win 65536 max 16384 > debug1: client_request_x11: request from 192.168.84.200 54403 > debug1: channel 2: new [x11] > debug1: confirm x11 > debug1: channel 2: FORCE input drain > debug1: channel 2: free: x11, nchannels 3 > > --------------- > | SYSTEM INFO | > --------------- > > Basic system information: > Linux gride2 2.6.18-274.17.1.el5.centos.plus #1 SMP Wed Jan 11 10:58:19 EST > 2012 i686 i686 i386 GNU/Linux > > Distribution: > centos 5.7 > > Checking Python version... > OK, version 2.4.3 installed > > Checking PyQt 4.x version... > error: NOT FOUND OR FAILED TO LOAD! > > Checking for CUPS... > Status: el programa de planificación de tareas se está ejecutando > Version: 1.3.7 > error_log is set to level: info > > Checking for dbus/python-dbus... > dbus daemon is running. > python-dbus version: 0.70.0 > > > ------------------------------------ > | COMPILE AND RUNTIME DEPENDENCIES | > ------------------------------------ > > note: To check for compile-time only dependencies, re-run hp-check with the > -c parameter (ie, hp-check -c). > note: To check for run-time only dependencies, re-run hp-check with the -r > parameter (ie, hp-check -r). > > Checking for dependency: CUPS - Common Unix Printing System... > OK, found. > > Checking for dependency: CUPS DDK - CUPS driver development kit... > warning: NOT FOUND! This is an OPTIONAL/RUNTIME ONLY dependency. Some HPLIP > functionality may not function properly. > > Checking for dependency: CUPS devel- Common Unix Printing System > development files... > OK, found. > > Checking for dependency: CUPS image - CUPS image development files... > OK, found. > > Checking for dependency: DBus - Message bus system... > OK, found. > > Checking for dependency: gcc - GNU Project C and C++ Compiler... > OK, found. > > Checking for dependency: GhostScript - PostScript and PDF language > interpreter and previewer... > OK, found. > > Checking for dependency: libcrypto - OpenSSL cryptographic library... > OK, found. > > Checking for dependency: libjpeg - JPEG library... > OK, found. > > Checking for dependency: libnetsnmp-devel - SNMP networking library > development files... > OK, found. > > Checking for dependency: libpthread - POSIX threads library... > OK, found. > > Checking for dependency: libtool - Library building support services... > OK, found. > > Checking for dependency: libusb - USB library... > OK, found. > > Checking for dependency: make - GNU make utility to maintain groups of > programs... > OK, found. > > Checking for dependency: PIL - Python Imaging Library (required for > commandline scanning with hp-scan)... > OK, found. > > Checking for dependency: PolicyKit - Administrative policy framework... > warning: NOT FOUND! This is an OPTIONAL/RUNTIME ONLY dependency. Some HPLIP > functionality may not function properly. > > Checking for dependency: PyQt 4 DBus - DBus Support for PyQt4... > error: NOT FOUND! This is a REQUIRED/RUNTIME ONLY dependency. Please make > sure that this dependency is installed before installing or running HPLIP. > > Checking for dependency: Python DBus - Python bindings for DBus... > error: NOT FOUND! This is a REQUIRED/RUNTIME ONLY dependency. Please make > sure that this dependency is installed before installing or running HPLIP. > > Checking for dependency: Python devel - Python development files... > OK, found. > > Checking for dependency: Python libnotify - Python bindings for the > libnotify Desktop notifications... > OK, found. > > Checking for dependency: Python XML libraries... > OK, found. > > Checking for dependency: Python 2.3 or greater - Required for fax > functionality... > OK, found. > > Checking for dependency: Python 2.2 or greater - Python programming > language... > OK, found. > > Checking for dependency: Reportlab - PDF library for Python... > warning: NOT FOUND! This is an OPTIONAL/RUNTIME ONLY dependency. Some HPLIP > functionality may not function properly. > > Checking for dependency: SANE - Scanning library... > OK, found. > > Checking for dependency: SANE - Scanning library development files... > OK, found. > > Checking for dependency: scanimage - Shell scanning program... > OK, found. > > Checking for dependency: xsane - Graphical scanner frontend for SANE... > OK, found. > > > ---------------------- > | HPLIP INSTALLATION | > ---------------------- > > > Currently installed HPLIP version... > HPLIP 3.11.12 currently installed in '/usr/share/hplip'. > > Current contents of '/etc/hp/hplip.conf' file: > # hplip.conf. Generated from hplip.conf.in by configure. > > [hplip] > version=3.11.12 > > [dirs] > home=/usr/share/hplip > run=/var/run > ppd=/usr/share/ppd/HP > ppdbase=/usr/share/ppd > doc=/usr/share/doc/hplip-3.11.12 > icon=/usr/share/applications > cupsbackend=/usr/lib/cups/backend > cupsfilter=/usr/lib/cups/filter > drv=/usr/share/cups/drv/hp > > # Following values are determined at configure time and cannot be changed. > [configure] > network-build=yes > pp-build=no > gui-build=yes > scanner-build=yes > fax-build=no > dbus-build=no > cups11-build=no > doc-build=yes > shadow-build=no > hpijs-install=yes > foomatic-drv-install=no > foomatic-ppd-install=yes > foomatic-rip-hplip-install=no > hpcups-install=no > cups-drv-install=no > cups-ppd-install=no > internal-tag=3.11.12 > restricted-build=no > ui-toolkit=no > qt3=no > qt4=no > policy-kit=no > hpijs-only-build=no > lite-build=no > udev-acl-rules=no > hpcups-only-build=no > hpijs-only-build=no > > > Current contents of '/var/lib/hp/hplip.state' file: > # hplip.state - HPLIP runtime persistent variables. > > [plugin] > installed=0 > eula=0 > > > > Current contents of '~/.hplip/hplip.conf' file: > > > -------------------------- > | DISCOVERED USB DEVICES | > -------------------------- > > No devices found. > > --------------------------------- > | INSTALLED CUPS PRINTER QUEUES | > --------------------------------- > > > BsAs-XP > ------- > Type: Unknown > Device URI: smb:///192.168.184.220/HPLaserJBSAS > PPD: /etc/cups/ppd/BsAs-XP.ppd > PPD Description: HP LaserJet P1505 Foomatic/foo2xqx (recommended) > Printer Unable to connect to CIFS host after (tried 3 times)ep 2011 > 11:34:46 ART - > warning: Printer is not HPLIP installed. Printers must use the hp: or > hpfax: CUPS backend to function in HPLIP. > > BsAs_note > --------- > Type: Unknown > Device URI: smb:///192.168.184.110/HP_BSAS > PPD: /etc/cups/ppd/BsAs_note.ppd > PPD Description: HP LaserJet P1505 Foomatic/foo2xqx (recommended) > Printer status: la impresora BsAs_note está inactiva. activada desde vie 05 > mar 2010 15:29:23 ART > warning: Printer is not HPLIP installed. Printers must use the hp: or > hpfax: CUPS backend to function in HPLIP. > > HP > -- > Type: Unknown > Device URI: parallel:/dev/lp0 > PPD: /etc/cups/ppd/HP.ppd > PPD Description: HP DeskJet 3810 Foomatic/hpijs (recommended) > Printer Paused: impresora HP desactivada desde jue 21 abr 2011 13:42:13 ART > - > warning: Printer is not HPLIP installed. Printers must use the hp: or > hpfax: CUPS backend to function in HPLIP. > > SCAN > ---- > Type: Unknown > Device URI: socket://192.168.84.182:9100 > PPD: /etc/cups/ppd/SCAN.ppd > PPD Description: Brother MFC-5490CN CUPS v1.1 > Printer status: la impresora SCAN está inactiva. activada desde vie 04 feb > 2011 18:55:55 ART > warning: Printer is not HPLIP installed. Printers must use the hp: or > hpfax: CUPS backend to function in HPLIP. > > > ---------------------- > | SANE CONFIGURATION | > ---------------------- > > 'hpaio' in '/etc/sane.d/dll.conf'... > OK, found. SANE backend 'hpaio' is properly set up. > > Checking output of 'scanimage -L'... > device `brother3:net1;dev1' is a Brother MFC-5490CN MFC > device `brother3:net1;dev0' is a Brother MFC-5490CN Scanner > > > --------------------- > | PYTHON EXTENSIONS | > --------------------- > > Checking 'cupsext' CUPS extension... > OK, found. > > Checking 'pcardext' Photocard extension... > OK, found. > > Checking 'hpmudext' I/O extension... > OK, found. > > Checking 'scanext' SANE scanning extension... > OK, found. > > > > --------------- > | USER GROUPS | > --------------- > > root bin daemon sys adm disk wheel > > > ----------- > | SUMMARY | > ----------- > > error: 10 errors and/or warnings. > _______________________________________________ > CentOS-es mailing list > CentOS-es@centos.org > http://lists.centos.org/mailman/listinfo/centos-es > _______________________________________________ > CentOS-es mailing list > CentOS-es@centos.org > http://lists.centos.org/mailman/listinfo/centos-es > _______________________________________________ CentOS-es mailing list CentOS-es@centos.org http://lists.centos.org/mailman/listinfo/centos-es
