He reseteado el cisco 2950 y repeti las configuraciones, verifique bien los pasos del manual ya mencionado y me resulto esto:
Escenario: *DLink Switch* --> Todos los equipos de red y ServidorPrincial (Firewall/DNS/DHCP/Samba/NFS). *CISCO 2950 *--> tiene conectado solamente el Servidor Secundario (HTTP+MySQL+Postfix) [10.0.1.2]. *CISCO 2950* --> Puerto 23 y 24 van al Servidor Secundario, el puerto 1 esta conectado a un puerto del DLINK. *Servidor Secundario* --> tiene configuradas la eth0 y eth1 como esclavas de interfaz virtual "bond0". Si conecto este servidor al DLINK todo marcha bien, pero al poner en el CISCO para usar Etherchannel, ya no responde :(. # estoy en mi laptop: 10.0.1.10, directo a DLink Switch # mi servidor 10.0.1.2 (http+ftp+mysql), directo a CISCO 2950 # *shell# telnet 10.0.1.254* Password: *Switch> enable* Password: # entre a administracion Switch# *Switch# sh run* interface Port-channel1 switchport access vlan 2 switchport mode access flowcontrol send off ! interface FastEthernet0/23 switchport access vlan 2 switchport mode access channel-group 1 mode on ! interface FastEthernet0/24 switchport access vlan 2 switchport mode access channel-group 1 mode on ! interface Vlan2 ip address 10.0.1.2 255.255.255.0 no ip route-cache shutdown ! ip default-gateway 10.0.1.1 ip http server Switch# sh vlan ... 2 VLAN0002 active Po1 ... Switch# sh etherchannel 1 port-channel Port-channels in the group: --------------------------- Port-channel: Po1 ------------ Age of the Port-channel = 0d:00h:28m:52s Logical slot/port = 1/0 Number of ports = 2 GC = 0x00000000 HotStandBy port = null Port state = Port-channel Ag-Inuse Protocol = - Ports in the Port-channel: Index Load Port EC state No of bits ------+------+------+------------------+----------- 0 00 Fa0/23 On/FEC 0 0 00 Fa0/24 On/FEC 0 Time since last port bundled: 0d:00h:08m:28s Fa0/24 Time since last port Un-bundled: 0d:00h:09m:30s Fa0/24 # AQUI no veo la "vlan2" ?? Switch# sh ip int brief | e down Interface IP-Address OK? Method Status Protocol Vlan1 10.0.1.254 YES manual up up FastEthernet0/1 unassigned YES unset up up FastEthernet0/23 unassigned YES unset up up FastEthernet0/24 unassigned YES unset up up Port-channel1 unassigned YES unset up up Switch# write memory shell# ping 10.0.1.2 PING 10.0.1.2 (10.0.1.2) 56(84) bytes of data. >From 10.0.1.10 icmp_seq=1 Destination Host Unreachable Saludos ! El 22 de octubre de 2013 17:41, angel jauregui <darkdiabl...@gmail.com>escribiĆ³: > Buenas. > > ConseguĆ un CISCO 2950 de 24 puertos y 2 Fibras. > Quiero implementar etherchannel aprovechando que mi servidor cuenta con 2 > tarjetas de red 10/100/1000. > > Como no se mucho al respecto sobre CISCO y su consola administracion, lo > primero que realice fue resetear el router usando el manual oficinal de > CISCO, despues accedi al portal del CISCO 2950, estableci mi password, abri > el telnel, asigne IP al Switch CISCO (10.0.1.254) y conecte el puerto 1 con > mi otro switch de la red lan (un DLINK). > > Conecte mi servidor (2 tarjetas) al switch CISCO, y pude realizar ping con > exito. > > En el CentOS del servidor implemente "bond0" como interfaz virtual que > maneja a eth0 y eth1 (ambas esclavas de bond0). Verifique que mi servidor > estuviera accesible y todo bien. > > Despues pase a configurar el CISCO 2950 pero aqui es donde no entiendo muy > bien los comandos :S, vayas son muchos comandos que trae la consola como > para bajarme un super manual. > Me gustaria saber si alguien puede apoyarme con esto, ya que realice una > configuracion basandome en este manual: > http://journey4ccie.com/2013/05/01/etherchannel-between-linux-centos-and-cisco-switches-virtualbox-how-to/ > > Mi idea es tener el puerto 23 y 24 como etherchanel (vlan), pero al final > de todo, no logro que funcione :(, cuando conecto mis interfaces a los > puertos 23 y 24, mi servidor se vuelve inaccesible :( > > Ademas realice estos comandos y noto que se asigno la IP deseada :'( > (10.0.1.2). > > *Switch# show vlan* > > VLAN Name Status Ports > ---- -------------------------------- --------- > ------------------------------- > 1 default active Fa0/1, Fa0/2, Fa0/3, > Fa0/4, Fa0/5, Fa0/6, Fa0/7, Fa0/8, Fa0/9, Fa0/10 > Fa0/11, Fa0/12, Fa0/13, > Fa0/14, Fa0/15, Fa0/16, Fa0/17, Fa0/18, Fa0/19 > Fa0/20, Fa0/21, Fa0/22, > Fa0/25, Fa0/26 > 10 VLAN0010 active Po1 > 1002 fddi-default act/unsup > 1003 token-ring-default act/unsup > 1004 fddinet-default act/unsup > 1005 trnet-default act/unsup > > VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 > Trans2 > ---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ > ------ > 1 enet 100001 1500 - - - - - 0 0 > > 10 enet 100010 1500 - - - - - 0 0 > > 1002 fddi 101002 1500 - - - - - 0 0 > > 1003 tr 101003 1500 - - - - - 0 0 > > 1004 fdnet 101004 1500 - - - ieee - 0 0 > > 1005 trnet 101005 1500 - - - ibm - 0 0 > > > Remote SPAN VLANs > > ------------------------------------------------------------------------------ > > > Primary Secondary Type Ports > ------- --------- ----------------- > ------------------------------------------ > > > *Switch# sh ip int brief | e down > * > Interface IP-Address OK? Method Status > Protocol > Vlan1 10.0.1.254 YES NVRAM up > up > FastEthernet0/1 unassigned YES unset up > up > FastEthernet0/22 unassigned YES unset up > up > FastEthernet0/23 unassigned YES unset up > up > FastEthernet0/24 unassigned YES unset up > up > Port-channel1 unassigned YES unset up > up > > > *Switch# show run* > ..... > interface FastEthernet0/23 > switchport access vlan 10 > switchport mode access > channel-group 1 mode on > ! > interface FastEthernet0/24 > switchport access vlan 10 > switchport mode access > channel-group 1 mode on > ..... > > Saludos ! > > -- > M.S.I. Angel Haniel Cantu Jauregui. > > Celular: (011-52-1)-899-871-17-22 > E-Mail: angel.ca...@sie-group.net > Web: http://www.sie-group.net/ > Cd. Reynosa Tamaulipas. > -- M.S.I. Angel Haniel Cantu Jauregui. Celular: (011-52-1)-899-871-17-22 E-Mail: angel.ca...@sie-group.net Web: http://www.sie-group.net/ Cd. Reynosa Tamaulipas. _______________________________________________ CentOS-es mailing list CentOS-es@centos.org http://lists.centos.org/mailman/listinfo/centos-es