Hi Mike, Thanks for the info. I'd rather run monitoring such as tcpdump from the VM if possible and not the host as a simulation of a network appliance and with the intent eventually of giving others access to the VM and not the host. Here is the xml file for the private network:
<!-- WARNING: THIS IS AN AUTO-GENERATED FILE. CHANGES TO IT ARE LIKELY TO BE OVERWRITTEN AND LOST. Changes to this xml configuration should be made using: virsh net-edit virbr1 or other application using the libvirt API. --> <network> <name>virbr1</name> <uuid>####</uuid> <forward mode='nat'/> <bridge name='virbr1' stp='on' delay='0' /> <mac address='52:54:00:##:##:##'/> <ip address='192.168.100.1' netmask='255.255.255.0'> </ip> </network> There are two VMs connected to this interface, and the monitoring or "appliance" VM is connected to both this and the external interface. Please let me know if I can provide more info that will be relevant. Thanks, Kevin On Tue, Mar 22, 2016 at 9:41 AM, Mike - st257 <silvertip...@gmail.com> wrote: > On Mon, Mar 21, 2016 at 1:33 PM, Kevin Ross <sede...@gmail.com> wrote: >> >> Hi folks, >> >> I posted this question to the KVM list, but I thought I'd try here >> too--sorry if this is the wrong place to post this, can you please >> direct me to the correct forum or list if so, thanks! >> >> I'm working on a network security project, using KVM installed on >> CentOS 6.7 through yum. I have a VM with the goal of using this as a >> network appliance, and two other VMs, one simulating an attack node >> and the other simulating a vulnerable webapp. These are all connected >> to the same internal private network set up in KVM. The idea with the >> network appliance VM is to have it act as if it's connected to a >> network tap so it can see the traffic between the other two VMs. I'm >> not able to see the traffic currently and would appreciate your help >> or suggestions to see if this is possible and how I can set this up if > > > From the KVM host you should be able to point tcpdump at the vnetX > interfaces and sniff. > I've had to do this on occasion (with a bridged network setup) when a web > hosting VM was being brute forced. > >> >> so. I came across some information online suggesting to have the >> interfaces in promiscuous mode, including the virtual NIC for the >> private network, and I've tried all combinations. Thanks for any help >> you can offer! > > > Start by determining what interface your VM is attached to. > > We have no idea the network layout of your KVM set up for VMs either. > Look at the XML for your VM to determine which interface it's tied to. > > -- > ---~~.~~--- > Mike > // SilverTip257 // > > _______________________________________________ > CentOS-virt mailing list > CentOS-virt@centos.org > https://lists.centos.org/mailman/listinfo/centos-virt > -- sede...@gmail.com _______________________________________________ CentOS-virt mailing list CentOS-virt@centos.org https://lists.centos.org/mailman/listinfo/centos-virt