Feizhou wrote: > > >>>> Is there any way to tell the card to forget about not > having a BBU > >>>> and behave as if it did? > >>> Short of modifying the code...I do not know of any. > >> Well, I've now got BBUs on order for the three identical > machines to > >> see if that does anything to improve matters - I'll report > back when > >> I've fitted them. A glance through the 2.26.05.007 driver > code shows > >> no references to the BBU, so the different code paths > (with BBU and > >> without) must be in the firmware itself. > > > > If your card is on a PCI riser try running it plugged > directly in the > > slot (if you can) and see if that helps. > > > > He said his card is directly plugged in.
Doh, problem with the long threads, one forgets everything that was mentioned earlier unless they re-read the whole thread again. -Ross ______________________________________________________________________ This e-mail, and any attachments thereto, is intended only for use by the addressee(s) named herein and may contain legally privileged and/or confidential information. If you are not the intended recipient of this e-mail, you are hereby notified that any dissemination, distribution or copying of this e-mail, and any attachments thereto, is strictly prohibited. If you have received this e-mail in error, please immediately notify the sender and permanently delete the original and any copy or printout thereof. _______________________________________________ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos