First, some light reading:
http://lartc.org/howto/
Secondly, take a look at how RedHat/CentOS uses network startup scripts:
http://www.redhat.com/docs/manuals/enterprise/RHEL-4-Manual/en-US/Reference_Guide/pt-network-services-reference.html
Thirdly, READ THIS ENTIRE DOCUMENT. Seriously. Not kidding.
/usr/share/doc/initscripts-7.93.29.EL/sysconfig.txt
... paying close attention to this section:
/etc/sysconfig/network-scripts/route-<interface-name>
You cannot configure a RedHat/CentOS box with more than one *default*
route in it's basic networking configuration. You can, however,
create two custom routing tables, create different default routes on
THOSE tables, then use "ip rule" and IPTABLES mangling to tell packets
where to go. See the above documents for reference.
Regards,
Ken
Hi, guys!
We need to setup our both network device on centos-4.5 as follow:
eth0: IP: 192.168.1.0/24 GW 192.168.1.1
eth1: IP: 192.168.10.0/24 GW 192.168.10.1
We don't know how to create our setup files for both network (eth0,
eth1 and their routes)?
_______________________________________________
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
