Peter Kjellstrom wrote:
On Monday 15 October 2007, Dan Carl wrote:
...
But with errors
In dmesg have this:
sda: Mode Sense: bf 00 00 08
SCSI device sda: drive cache: write back
sda: unknown partition table
sd 0:0:0:0: Attached scsi disk sda
Those are not errors. But it doesn't seem to have a partition table (see
below)
I have no experience with the Smart Array Controller, just what I read the
past couple of days.
Here's how it was mounted on the HP server
/dev/cciss/c0d1 /stor02 ext3 defaults 1 1
Ah, they put the ext3 directly on the device. Consistent with the above data.
Is there a way I can get the data off the array with my Centos server?
Any help/suggestions/tips would be greatly appreciated, I've hit a brick
wall.
Try "mount -oro /dev/sda /mnt/tmp" (or whatever) or just see if there's a
superblock there with "tune2fs -l /dev/sda".
he has a hardware raid set of drives originally from a HP/Compaq
SmartArray controller, now connected to a simple non-raid scsi
controller. sorry, thats not gonna play no way no how.
_______________________________________________
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
