On 24/05/2015 15:36, Tim Dunphy wrote:
Hey guys,
I'm trying use check_memcached.pl to monitor a couple of memcached services
running on two ports.
I have my command definition setup like this:
# 'check_memcached' command definition
define command {
command_name check_memcached
command_line $USER1$/check_memcached.pl -H $HOSTADDRESS$ -p $ARG1$
}
And I have my service definitions setup like this:
# Define a service to check memcached on web1 (just the basics for right
now).
define service{
use local-service ; Name of
service template to use
host_name web1
service_description Check Memcached 11211
contact_groups linux-admins
check_command check_memcached!web1.example.com
!11211
notifications_enabled 1
}
# Define a service to check memcached on web1 (just the basics for right
now).
define service{
use local-service ; Name of
service template to use
host_name web1
service_description Check Memcached 11212
contact_groups linux-admins
check_command check_memcached!web1.example.com
!11212
notifications_enabled 1
}
And if I run both checks manually they succeed:
[root@monitor1:/usr/local/nagios/etc/objects/servers] #../../../libexec/
check_memcached.pl -H web1.example.com -p 11211
MEMCACHE OK: memcached 1.4.22 on web1.example.com:11211, up 22 minutes 52
seconds
[root@monitor1:/usr/local/nagios/etc/objects/servers] #../../../libexec/
check_memcached.pl -H web1.example.com -p 11212
MEMCACHE OK: memcached 1.4.22 on web1.example.com:11212, up 12 minutes 2
seconds
Yet, in my nagios web interface, I'm getting this error:
Check Memcached 11211
<https://nagios.jokefire.com/nagios/cgi-bin/extinfo.cgi?type=2&host=web1&service=Check+Memcached+11211>
CRITICAL
05-24-2015 14:28:31
0d 0h 10m 19s
4/4
CRITICAL ERROR - Can not connect to '162.243.60.6' on port 0
Check Memcached 11212
<https://nagios.jokefire.com/nagios/cgi-bin/extinfo.cgi?type=2&host=web1&service=Check+Memcached+11212>
CRITICAL
05-24-2015 14:29:12
0d 0h 11m 8s
4/4
CRITICAL ERROR - Can not connect to '162.243.60.6' on port 0
I thought I could specify the command in the service definition like this:
check_memcached!web1.example.com!11211
To reproduced the command as it's executed on the command line. How can I
specify the port correctly here?
Thanks,
Tim
Hi Tim,
Your command specification is wrong. It will get the -H attribute from
the host_name you should not specify it on the check_command and By
doing so what you have effectively done is write:
check_memcached.pl -H web1.example.com -p web1.example.com 11211
if you enable debug_level=2048 you should be able to see the commands
that Nagios is creating.
Tris
*************************************************************
This email and any files transmitted with it are confidential
and intended solely for the use of the individual or entity
to whom they are addressed. If you have received this email
in error please notify postmas...@bgfl.org
The views expressed within this email are those of the
individual, and not necessarily those of the organisation
*************************************************************
_______________________________________________
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
