I am building a new system using an Kingston 240GB SSD drive I pulled
from my notebook (when I had to upgrade to a 500GB SSD drive). Centos
install went fine and ran for a couple days then got errors on the
console. Here is an example:
[168176.995064] sd 0:0:0:0: [sda] tag#14 FAILED Result:
hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[168177.004050] sd 0:0:0:0: [sda] tag#14 CDB: Read(10) 28 00 01 04 68 b0
00 00 08 00
[168177.011615] blk_update_request: I/O error, dev sda, sector 17066160
[168487.534510] sd 0:0:0:0: [sda] tag#17 FAILED Result:
hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[168487.543576] sd 0:0:0:0: [sda] tag#17 CDB: Read(10) 28 00 01 04 68 b0
00 00 08 00
[168487.551206] blk_update_request: I/O error, dev sda, sector 17066160
[168787.813941] sd 0:0:0:0: [sda] tag#20 FAILED Result:
hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[168787.822951] sd 0:0:0:0: [sda] tag#20 CDB: Read(10) 28 00 01 04 68 b0
00 00 08 00
[168787.830544] blk_update_request: I/O error, dev sda, sector 17066160
Eventually, I could not do anything on the system. Not even a
'reboot'. I had to do a cold power cycle to bring things back.
Is there anything to do about this or trash the drive and start anew?
Thanks
_______________________________________________
CentOS mailing list
CentOS@centos.org
https://lists.centos.org/mailman/listinfo/centos
