On Wed, 27 Feb 2008, Joseph L. Casale wrote:
hi all,
i just inherit a server:
Compaq ProLiant ML370 Generation 2 Server with Smart Array 5300
Controller with 6x18.2GB hard drives.
i want to install centos 5 on it with hardware raid 1. any idea how?
it
also has a build-in and add-on ethernet cards. how do i know which one
is
which to assign ip?
thanks.
t. hiep
First deduce what Raid Levels mean, possibly at
http://en.wikipedia.org/wiki/Standard_RAID_levels. A mirror across 6 tiny discs
like those won't leave you much room :) You might gain the
performance/redundancy you need with an alternative level, I doubt you need 6
discs mirrored:) What are you doing with this server? That will help define
what config/partitioning scheme you might want to use.
Do you have a cdrom or DVDrom? That dictates what media type to download,
unless you want to do a net install for example.
Goto HP's site and download the manual for your server so you can figure out
how to configure boot orders, array's etc.
As far as the NIC's go, you could use a combination of lspci and ifconfig, just
watch as it goes up and down when you move the cables for example.
Good luck,
jlc
_______________________________________________
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
basically, my question is do i want to config raid before install os or
vs? i only want to use hardware raid and my controller & hd are scsi.
thanks,
t. hiep
_______________________________________________
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
