Fabio Macchi wrote:
-----Original Message-----
From: centos-boun...@centos.org [mailto:centos-boun...@centos.org] On Behalf Of
A Linux Fanatic
Sent: martedì 23 dicembre 2008 06:08
To: CentOS mailing list
Subject: Re: [CentOS] cluster - ip address lost when service stopped
Fabio Macchi wrote:
Hi all,
I'm trying to setup a cluster of 2 machines with Centos 5.2 to host a
postfix+spamassassin+clamav+mailscanner service. Below cluster
software versions
rgmanager.i386 2.0.38-2.el5_2.1 installed
cman.i386 2.0.84-2.el5_2.2 installed
Every machine (hp blade server ) has 4 interfaces, bounded in this way:
Eth0, eth1 -> bond0 -> connection for public service ( 10.0.181.x )
Eth2,eth3 -> bond1 -> connection for intra-cluster communication (
192.168.44.x )
bond0 Link encap:Ethernet HWaddr 00:21:5A:48:DA:BE
inet addr:10.0.181.41 Bcast:10.0.181.255 Mask:255.255.255.0
inet6 addr: fe80::221:5aff:fe48:dabe/64 Scope:Link
UP BROADCAST RUNNING MASTER MULTICAST MTU:1500 Metric:1
RX packets:85 errors:0 dropped:0 overruns:0 frame:0
TX packets:86 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:12963 (12.6 KiB) TX bytes:9144 (8.9 KiB)
bond1 Link encap:Ethernet HWaddr 00:1F:29:6D:7D:08
inet addr:192.168.44.41 Bcast:192.168.44.255 Mask:255.255.255.0
inet6 addr: fe80::21f:29ff:fe6d:7d08/64 Scope:Link
UP BROADCAST RUNNING MASTER MULTICAST MTU:1500 Metric:1
RX packets:29 errors:0 dropped:0 overruns:0 frame:0
TX packets:223 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:4612 (4.5 KiB) TX bytes:31746 (31.0 KiB)
Then I've created a new Mail service with these local resources:
- Ip address 10.0.181.3
- Script /etc/rc.d/init.d/MailScanner
- GFS file system on a SAN
Service start, but the problem is that, when I stop the service,
external ip address is removed from bond0.
Hi Fabio,
Could you please attach the following files:
/etc/sysconfig/network-scripts/ifcfg-bond0
/etc/sysconfig/network-scripts/ifcfg-bond1
/etc/sysconfig/network-scripts/ifcfg-eth0
/etc/sysconfig/network-scripts/ifcfg-eth1
/etc/sysconfig/network-scripts/ifcfg-eth2
/etc/sysconfig/network-scripts/ifcfg-eth3
/etc/cluster/cluster.conf
And "external ip address is removed from bond0." - I assume here
external IP is 10.0.181.41, right?
Thanks
Gowrishankar Rajaiyan | A Linux Fanatic.
_______________________________________________
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
Hi Gowrishankar,
requested files attached; you well understand, I mean ip 10.0.181.41 disappear
( below the output from ifconfig after I tried to stop the service)
bond0 Link encap:Ethernet HWaddr 00:21:5A:48:DA:BE
inet6 addr: fe80::221:5aff:fe48:dabe/64 Scope:Link
UP BROADCAST RUNNING MASTER MULTICAST MTU:1500 Metric:1
RX packets:52958 errors:0 dropped:0 overruns:0 frame:0
TX packets:7844 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:4915061 (4.6 MiB) TX bytes:4936239 (4.7 MiB)
Tks
Fabio
Hi Fabio
First, issue the command:
$ rpm -qf /sbin/ifup
It will respond with a line of text starting with either "initscripts"
or "sysconfig," followed by some numbers. This is the package that
provides your network initialization scripts.
Next, to determine if your installation supports bonding, issue the command:
$ grep ifenslave /sbin/ifup
If this returns any matches, then your initscripts or sysconfig has
support for bonding.
Ref: http://www.linuxfoundation.org/en/Net:Bonding
Try configuring ifcfg-bondX using the contents described in the above link.
Thanks
Gowrishankar Rajaiyan | A Linux Fanatic.
_______________________________________________
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
