On Thu, 2009-06-11 at 14:46 -0500, Vadtec wrote: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > Ok, firstly, I have dropped using the alias notation and am now working solely > on eth0. > > Secondly, yes, I am talking about provisioning more than *one* IP at a time as > being a "range". > > As for IPV6ADDR_SECONDARIES, when I use the following config: > /etc/sysconfig/network-scripts/ifcfg-eth0: > DEVICE=eth0 > IPADDR=***.***.***.*** > NETMASK=255.255.255.0 > BROADCAST=***.***.***.*** > ONBOOT=yes > > IPV6INIT=yes > IPV6ADDR="2001:0470:0103:001A::2/64" > IPV6ADDR_SECONDARIES="2001:0470:0103:001A::3-2001:0470:0103:001A::FFFF" > IPV6_AUTOCONF=no > IPV6_ROUTER=no > IPV6FORWARDING=no > PEERDNS=no > VLAN=no > > I get the following error: > > Shutting down interface eth0: [ OK ] > Shutting down loopback interface: [ OK ] > Bringing up loopback interface: [ OK ] > Bringing up interface eth0: ERROR : [ipv6_test_ipv6_addr_valid] Given IPv6 > address '2001:0470:0103:001A::3-FFFF' is not valid > WARN : [ipv6_add_route] 'No route to host' adding route '::/0' via gateway > '2001:0470:0103:001A::1' through device 'eth0' the file /usr/share/doc/initscripts-8.45.25/sysconfig.txt does NOT mention the - for ranges either, so I guess you are out of luck. Louis
_______________________________________________ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos